Laminar Flow Clean Bench Operational Manual BBS-13HGS/VGS ...

MRC TEL:00972-3-5595252 FAX:00972-3-5594525Equipment maintenance1). The key part of proper maintenance ,management and ensuring thecleanness of working zone is building the strict regulation, and strictlycontrol tool, material of the usage and visitor .2). Ensuring the cleanness of working zone 10~20 minutes before using,and notice the following:A. Worker must wear the clean smock, hat that is made of long fiber to washeasily.B. Use the ball-point pen and tracing paper to write, which don’t easilysuction dust.C. Forbid to do significant action that deliver dust, such as: scratch the head,take a step quickly etc.D. Worker of microorganism and medicine industry must wear themouth-muffle, forbidding to using the steam to disinfect.E. Don’t put thing on the bench. If the article should be placed to both endsas far as possible.F. During operation head and hands should put in the produce leeway side.With the special demands worker should wear the rubber gloves or the nailsets.3, Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com 10