Laminar Flow Clean Bench Operational Manual BBS-13HGS/VGS ...

More documents

Recommendations

Info

MRC TEL:00972-3-5595252 FAX:00972-3-5594525Main technique parameterOverall Dim (mm):1300*750*2000 mm (Length*Width*Height)Working zone (mm):1200*645*610 mm (Length*Width*Height)Dust(for ≥0.5um): ≤3.5 Granule/L<strong>Clean</strong> rate(for ≥0.5um): >99.95%Air Velocity: 0.3-0.5m/sNoise:
MRC TEL:00972-3-5595252 FAX:00972-3-5594525Installation1).Because the condition of installation directly influences usage result andlife span, the device must be installed in the cleaning room or the cleannessroom that has the plastics ground (or the water mill stone ground) andvarnish wall.2). The device should steady emplacement to reduce the vibration and thenoise when it works.3). Airflow affects greatly the clean result. So worker takes strict precautionsagainst outside various high-speed current of air to interference of operationarea, such as door, window, fan, draught of sending air, compressed air ect.4). Power supply has special switch. After power supply carries on withrequisition, please check the wind velocity of the operation experiments thatshould over 0.3 m/s. Otherwise check again.5). After installation, please sweep the place with vacuum or long fibertextile that is immerse in cymene.3, Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com 7
Page 1 and 2: Laminar Flow Clean BenchOperational
Page 3 and 4: MRC TEL:00972-3-5595252 FAX:00972-3
Page 5: MRC TEL:00972-3-5595252 FAX:00972-3
Page 11: MRC TEL:00972-3-5595252 FAX:00972-3
Page 16: DCBACircuit chart2341蓝 (Φ1)接

Laminar Flow Clean Bench Operational Manual BBS-13HGS/VGS ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?