IHE Patient Care Device Technical Framework

IHE Patient Care Device Technical Framework, Vol. 2: Transactions________________________________________________________________________Publication ID (Query ID=Z02):Response Characteristics:Based on Segment Pattern:Z02filtered or unfiltered, as specified in the input parameters.PCD-01 ORU messages are returned corresponding to theconstraints expressed in the input parameters.The input parameters are ANDed when selecting data to bereturned. That is, all input parameters that are specified mustbe satisfied in order for a result report to be sent.Parameters that are left empty are ignored in defining thefilter criteriaR013.2.6 PCD-02 – QSB^Z02^QSB_Q16 static definitionCommon HL7 segments (MSH, MSA, ERR, NTE, PID, PV1, OBR, OBX, QPD, RCP,TQ1) and data types (CE, CQ,CX, EI, HD, PL, TS, XPN, XTN) used in IHE PCDtransactions are defined in Appendix B Common Message Segments for the Patient CareDevice Technical Framework and Appendix C Common Data Types.Table 3 PCD-02 - QSB^Z02^QSB_Q16 static definitionQSB^Z02^QSB_Q16 Query Grammar: QSB Message Usage Card. SectionRef.MSH Message Header Segment R [1..1] 2.15.9[{SFT}] Software Segment X [0..0] 2.15.12QPD Query Parameter Definition R [1..1] 5.5.4RCP Response Control Parameter R [1..1] Error!Referencesource notfound.[ DSC ] Continuation Pointer CE [0..1] 2.15.410The IHE PCD TF supports filtering based on the parameters defined in Table 4 QPDInput Parameter Specification and described in Table 5 QPD Input Parameter FieldDescripion and Commentary.Table 4 QPD Input Parameter SpecificationFieldSeq(QueryID=Z02)ColNameKey/SearchSortLEN DT OptRP/#MatchOpTBL #SegmentFieldNameServiceIdentifierCodeElementName1 MessageQueryName 60 CE R [1..1] MessageQueryNameRev. 1.1 TI: 2006-08-1521Copyright © 2005-2006: ACC, ACCE, HIMSS, and RSNA