Ethernet Protocol of VZ-9, VZ-9plus, VZ-27plus, VZ ... - WolfVision

Zoom ControlZoom ControlDec.- Command Description NotesCode195 Zoom wide By sending this command the Visualizer zooms towards wideposition.1For continuous zooming send this code repetitively(min. 10Hz) as long as you want to zoom.199 Zoom tele By sending this command the Visualizer zooms towards teleposition.1For continuous zooming send this code repetitively(min. 10Hz) as long as you want to zoom.129 Start Zoom wide This command starts to zoom towards the wide-position. The 1Visualizer zooms until the „Stop Zoom/Focus/Iris“-command ora different Start-Command is received (or the mechanical endpositionis reached).130 Start Zoom tele This command starts to zoom towards the tele-position. TheVisualizer zooms until the „Stop Zoom/Focus/Iris“-command ora different Start-Command is received (or the mechanical endpositionis reached).1128 StopZoom/Focus/IrisThis command stops zooming, focusing and iris (if activatedwith the respective „Start xxx“-command before).142 Macro Off Switches the Macro Off. 1143 Macro 11 Switches the Macro 11x On. 1144 Macro 12 Switches the Macro 12x On. 1189 Macro, toggleswitchSwitches the Macro On/Off (in the on-screen menu selectedMacro position)1T-06-02.Ethernet Protocol VZ-9_27plus_57plus_C11_C12_C30_C32.doc Page 3 WolfVision