Balancer Diagnostic Codes - Snap-on Equipment

4B Incremental potentiometer4c Rim light61 Balancing algorithm62 Balancing calibration63 Behind the spokes placement64 65 Optimisation66 Measurement control81 Command language (Commands coming from the UI)82 Calculator83 Message Server (Message service from BK to UI)84 Message Server (User messages from BK to UI)85 Sleep command86 Balancing Kernel : Test state machine (eg self-test during start-up)A1 Event systemA2 User managementA3 State machineA4 complex data typeA5 Persistent objectsA6 Pipe deviceA7 Power on time counter (-> time stamp for error recording)A8 Counter for total spins / in service-, in user modeC1 Self testC2 User interfaceC3 User interface2.3.3 Priority IDPrior. ID Description0 Critical error (will be recorded in user mode)1 Warning message2 For information only3 All of above, but will not be recorded in the error record (persistent objects p30to p39)Copyright © 2007 <strong>Snap</strong>-on Equipment Services. All Rights Reserved 19