product manual for Intex Round Above Ground Pool Sand ... - Meijer

More documents

Recommendations

Info

Meijer.com(163) MODEL CS15110 SAND FILTER PUMP & FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 11/08/2011English163MAINTENANCE (continued)INTEX ® COPPER ION TEST STRIPS (PACKED WITH THE PRODUCT)The Copper Ion Test Strips can be used to test the copper ion concentration in the water.Directions and Use1. Dip the entire strip into the water for 3 seconds, then remove it.2. Hold the strip level for 15 seconds. Do not shake excess water from the strip.3. Now compare the copper ion strip pad to the color chart on the packaging label.INTEX ® 3-WAY TEST STRIPS (PACKED WITH THE PRODUCT)The 3-Way Test Strips can test the “Free Chlorine”, “pH”, and “Total Alkalinity” levels at thesame time. We recommend that you test the water chemistry weekly, and maintain thechlorine concentration at 0.4-1.5 ppm.Directions and Use1. Dip the entire strip into the water and remove immediately.2. Hold the strip level for 15 seconds. Do not shake excess water from the strip.3. Now compare the strip pad to the color chart on the packaging label. If necessary,adjust the chemical level in the pool water. It is very important, to use the propertechnique when testing the water's chemical level. Read and follow the written stripinstructions carefully.MAINTENANCEPOOL CARE & CHEMICALS• All pools require care to keep the water clear and hygienically clean. With properchemical control, your filter will help attain this objective. Consult your pool supply dealerfor instructions regarding the proper use of chlorine, algaecide and other chemicalagents required for sparkling clear water.• Keep pool chemicals away from children.• Do not replenish chemicals in pool while pool is occupied. Skin or eye irritations couldoccur.• Daily pH checking and chemical treatment of the water is very important and cannot beoveremphasized. Maintenance of proper pH levels are required when filling the pool aswell as during the season. Consult your local swimming pool supply store forinstructions.• The season's first filling of the pool may have brackish water requiring extra wateradditives and extra filtering time. Do not allow swimming in pool until the pH level isbalanced. Consult your local swimming pool supply store for instructions.• Chlorinated water may damage lawns, gardens or shrubbery as children play in the pooland splash water outside the pool. Lawn areas underneath the pool liner will bedestroyed. Note that some types of grass may grow through the liner.• Filter run time depends on pool size, weather and usage level. Experiment with variousrun times so as to produce clean clear water.SAVE THESE INSTRUCTIONS Page 30
Meijer.com(163) MODEL CS15110 SAND FILTER PUMP & FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 11/08/2011English163POOL MAINTENANCE & CHEMICAL DEFINITIONSPreferred Water Chemistry ReadingMinimum Ideal MaximumCopper Ions 0 0.1 - 0.2 ppm 0.2 ppmFree Chlorine 0 0.4 - 1.5 ppm 3.0 ppmCombined Chlorine 0 0 ppm 0.2 ppmpH 7.2 7.4 - 7.6 7.8Total Alkalinity 100 ppm 100 - 140 ppm 140 ppmCalcium Hardness 150 ppm 200 - 400 ppm 500 - 1000 ppmStabilizer (Cyanuric Acid) 10 ppm 30 - 50 ppm 100 ppmConsult with local swimming pool dealer for water treatment.Free Chlorine -Combined Chlorine -Is the chlorine residual present in pool water.Is formed by the reaction of free chlorine with ammoniawastes.Result if too high - Sharp chlorinous odor, eye irritation.pH - A value that indicates how acidic or basic a solution is.Result if too low - Corroded metals, eye & skin irritation,destruction of total alkalinity.Result if too high - Scale formation, cloudy water, shorterfilter runs, eye & skin irritation, poorchlorine efficiency.MAINTENANCETotal Alkalinity -Calcium Hardness -Stabilizer -(Cyanuric Acid)Indicates the degree of the water's resistance to changein pH. It determines the speed and ease of pH change,so always adjust total alkalinity before adjusting the pHlevel.Result if too low -Result if too high -Corroded metals, eye & skin irritation.Low alkalinity will cause the pH to beunstable. Any chemical added to thewater will have an affect on pH.Scale formation, cloudy water,eye & skin irritation, poor chlorineefficiency.Refers to the amount of calcium and magnesiumdissolved in the water.Result if too high - Scale will form and will cause thewater to become cloudy.Stabilizers extend the life of chlorine in swimming pools.• Do not add pool chemicals directly to the skimmer. This may damage the cell.• Maintaining a salt and sanitizer level above the recommended range cancontribute to the corrosion of the pool equipment.• Check the expiry date of the test kit as the test results may be inaccurate if thekit is used after that date.• If, due to heavy pool usage, it is required to increase the sanitizer level, then usea chemical based on trichlor, TCCA or dichloro.SAVE THESE INSTRUCTIONS Page 31
Page 3 and 4: Meijer.com(163) MODEL CS15110 SAND
Page 15: Meijer.com(163) MODEL CS15110 SAND
Page 18 and 19: ECIRCULATEMeijer.comBCLOSEWASTERECI
Page 40: (163) MODEL CS15110 SAND FILTER PUM

product manual for Intex Round Above Ground Pool Sand ... - Meijer

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?