Partito Screen - Steelcase Village

Product DescriptionPartito ScreenCONTENTS1. Product Overview2. Product Components3. Modular and functional structure4. Materials5. Environment6. Product ergonomics7. SafetyPage 1 of 15

Page 2 of 151. PRODUCT OVERVIEW

2. PRODUCT COMPONENTS3 VARIATIONSHEIGHT ADJUSTABLE:Height-adjustable variations are mounted behind the desk. Twoheights are available: 790mm, 990mm.990 - 1500790 - 1300790990DESK-MOUNTED:Partito Screen’s rear edge lies flush with the rear edge of thedesk. Partito Screen shortens the useful work surface depth by35mm. Two heights are available: 363mm, 463mm.72012001100463363BACK-TO-BACK CONFIGURATION:Back-to-back variations are mounted on the desk. PartitoScreen is centred between two desks in back-to-backconfiguration. Partito Screen shortens useful work surfacedepth by 17.5mm. Two heights are available: 363mm, 463mm.Page 3 of 15

72012001100463363PARTITO SCREEN & DESKHEIGHT ADJUSTABLE:For height-adjustable variations, screens are installed acrossthe width of the desk’s rear edge. Two adapters per screen arerequired for this purpose. A cut-out at the desk’s rear edge isnot required.A connector set is required to connect two screens.Example:Partito Screen height adjustableExample:2x Partito Screens height adjustable (left + right)Page 4 of 15

DESK-MOUNTED:For desk-mounted variations, individual screens are installedacross the width of the desk’s rear edge. For this purpose, twoadapters per screen and two cut-outs on the rear edge of thedesk are required.Example:Desk-mounted Partito ScreenDesk-mounted Partito Screen basic screen (left/right)A compensating device and connector set are required forconnecting two screens.It is advisable to use two extension screens. Each of themrequires an adapter, a leg and a cut-out on the rear edge.Example:Desk-mounted Partito Screen extension screen (left+right)Page 5 of 15

BACK-TO-BACK CONFIGURATION:For back-to-back variations, individual screens are installedacross the width of the desk’s rear edge. Two adapters perscreen and two cut-outs per rear edge are required.Example:Partito Screen for back-to-back configuration:Example:Partito Screen for back-to-back configuration basic screen(left/right)A compensating device and connector set are required forconnecting two screens.It is advisable to use two extension screens. Each of themrequires an adapter, a leg and a cut-out on the rear edge.Example:Partito Screen for back-to-back configuration extension screen(left/right)Page 6 of 15

3. MODULAR AND FUNCTONAL STRUCTUREFRAME AND PANELSFRAME 35MM THICK:Connected with die-cast zinc corners, 35mm thick continuousaluminium profiles can be fitted with the following panels:Panel, 8mm thickPage 7 of 15

Panel, 35mm thickPanel with acoustic, 35mm thick (class C)Upholstered panels and Orga-Panel (optional) are clamped intothe frame. Desk adapters and connector sets are alsoconnected via the frame (screen to screen).PANELLINGThe panelling built into the frame is available in 2 thicknesses:– 8mm– 35mm, flush with aluminium screenPanelling is available in the following materials:– Melamine, particle board with melamine finish, 8mm thick– Wood veneer, particle board with veneered finish, 8mm thick– Acrylic double-web, 8mm thick– Fabric-covered particle board, 8mm or 35mm thickPage 8 of 15

– Fabric, non-woven PE material, upholstered, 35mm thickFor standard built-in Orga-Panel, the lower and upper panellingcomes in the same material. Upper panelling is optionallyavailable in acrylic double-web.not H363ORGA-PANELAs an option, panelling can be additionally fitted with an Orga-Panel. This is designed to support trays and pencil boxes, etc.The Orga-Panel is available in two variations:– 1-rail– 5-railThe Orga-Panel can be fitted in two positions. Dimensionsdepend on the variation:– height adjustable above, or 405mm from lower edge of PartitoScreen to lower edge of Orga-Panel405Page 9 of 15

– Desk-mounted above, or 182mm from lower edge of PartitoScreen to lower edge of Orga-Panel (not for H = 363)182not H363– Back-to-back above, or 182mm from lower edge of PartitoScreen to lower edge of Orga-Panel (not for H = 363)182not H363The 1-rail Orga-Panel should only be used for light accessoriesfrom the 1+1 range.The 5-rail Orga-Panel is suitable for supporting a monitor arm.Max. load: 10kg per side, 20kg in total.CONNECTORSIf two Partito Screens are assembled right next to each other –e.g. both rear edges of corner desks – then they must beconnected.Connectors consist of a special aluminium tube which isfastened to the frame by means of a clamping block.Page 10 of 15

DESK VERSATILITY:RANGE-SPECIFIC ADAPTERS:Specific adapters are used to combine Partito Screen withvarious desk ranges:– Activa– FrameOne– FrameOne Bench– Kalidro– Quba II– Tenaro– Vitesse IIC-CLAMP AS UNIVERSAL ADAPTERPartito Screen can be directly connected to the desktop byusing a C-clamp as a universal adapter.The following dimensions are required:– Width 63mm– Rear edge thickness 6mm– Clamp depth below desktop 25mm– Height below desktop 26mmWhen a C-clamp is used, Partito Screen can be only used inback-to-back configuration.Page 11 of 15

ACCESSORIESSTACKABLE SCREENFor a little additional privacy, a white Plexiglass screen can bemounted to the upper frame profile.The screen is available in 3 different widths (650mm, 850mm,1050mm), with a height of 165mm and a thickness of 6mm.Two aluminium clamps are used to connect it to Partito Screen.RETURN SCREENFor a little lateral privacy, a white Plexiglass panel can bemounted to the frame profile.The panel comes in two different heights (363mm, 463mm), 5different widths (600mm, 700mm, 800mm, 900mm, 1000mm)and is 6mm thick. Two aluminium clamps are used to connect itto Partito Screen.SHELVES19mm-thick shelves are available in melamine or wood veneer.14-mm thick shelves are available in TechTop.Lateral sheet steel shelf brackets measuring 120mm in heightcan be used as bookends.An aluminium profile is built into the rear of the shelf, and canalso support bookends.Max. shelf load capacity: 1.4 kg/10cm. Also check max. loadcapacity of the respective desk range!Attention:• Max. load 1.4kg/10cm width• Max. load 28 kg• Max. 1 shelf per sidePage 12 of 15

4. MATERIALMATERIAL, COATING AND COLOURSMaterialCoating, coloursFrame profile Aluminium AnodisedDie cast corners Die cast aluminium Varnished, silverDesk adaptersDie cast aluminiumSheet steelOrga-Panel Aluminium AnodisedPanellingMelamine3-layer fine particle boardWood veneer(DIN 68765-H1, grade E1)3-layer fine particle board(DIN 68765-H1, grade E1)Varnished, silverPowder-coated, see price listfor available coloursMelamine resin coated, seeprice list for available coloursVeneer coated with UVhardeningwater enamel, seeprice list for available coloursAcrylic Acrylic double-web Clear, translucentFabric 8mm3-layer fine particle board0.8cmsee price list for availablecolours and fabricsFabric 35mmTwo 3-layer fine particleboard 0.8 cmsee price list for availablecolours and fabrics5. ENVIRONMENTRECYCLINGFabric and panelling are disposed of thermally.Other materials (steel, plastic and aluminium) are recycled.6. PRODUCT ERGONOMICSPartito Screen offers visual privacy and supports organisation.Part of the organisational function lies on a vertical axis (“fromdesktop to wall”), thereby reducing required surface area perworkstation.Thanks to its sleek and modern design, Partito Screen canbasically be combined with all desk ranges.Page 13 of 15

• Visual privacy: The degree of privacy can be customisedthanks to the range of available heights.• Design: Shape and materials offer a contemporary andneutral look, enabling Partito Screen to be used in allenvironments.• Organisation: 1-rail or 5-rail Orga-Panels are designed tosupport trays and pencil boxes, etc. Not only do theysupport workspace tidiness but also contribute to surfaceefficiency.• Acoustic: Partito Screen’s sound-absorbent properties –(class-C) contribute to better room acoustics. Roomacoustics have a direct effect on concentration and thus onstaff performance potential.• Variations: The height-adjustable variation is designed tosupport a consistent line on the top edge of Partito Screen,tailored to the user’s respective height.Desk-mounted and back-to-back variations supportoptimal posture and optimal appearance to suit all needs.7. SAFETYCERTIFICATESSteelcase Werndl AG applies Total QualityManagement to its production processes and hashad DIN ISO 9001 accreditation since 1995. Thisensures that our products are of consistently highquality.Page 14 of 15

Steelcase Werndl AG bears the Eco-Audit sealfor EC environment management and sustainabledevelopment.‘GS-Zeichen’ (Geprüfte Sicherheit –TestedSafety) The entire range has been awarded the‘GS-Zeichen’ (Geprüfte Sicherheit -Tested Safety)by TÜV Bayern. This applies to all desks, cornerelements, attachments and accessories.Steelcase provides an 8 year - internationalmanufacturer guarantee on its products.Page 15 of 15