AVR32 Series - MSC Budapest Kft.

Family Overview AT32AP7002The AT32AP7002 is a device reduction of the full-fledged AP7000 related to someperipherals. It can be used in applications where no Ethernet connection is neededbut process visualization is an issue. The AP7002 can be used for applicationsdeployed in cell phones, digital cameras, automotive infotainment, process automation,set top boxes, and home entertainment systems. The embedded Pixel-Coprocessoraccelerates processing of images and video streams and is directly connectedto the core to perform single cycle execution on processor speed.The AT32AP7002 operates at 210 MIPS with a 150 MHz clock. It features 32K bytesof SRAM directly connected to the high-speed bus matrix, an external bus interfacewith controllers for SDRAM and static memories including NAND Flash andCompactFlash with ECC. Its extensive peripheral set includes a USB High SpeedDevice interface, Image Sensor Interface, Multimedia Card Interface (MCI), aLCD-Controller for TFT and STN Displays, Synchronous Serial Controllers (SSC),USARTs, Master/Slave Serial Peripheral Interfaces (SPI), two three-channel 16-bitTimer Counter (TC) and a Two Wire Interface (TWI). Up to three GPIO Controller(each 32-bit wide) are selecting general I/O’s or do connect the peripherals to dedicatedpins via multiplexer. Peripheral DMA channels maximize the data throughputbetween these interfaces and the on- and off-chip memories.The AT32AP7002 is available in a 196-ball CTBGA RoHS-compliant package providingup to 88 GPIO multiplexed with peripherals.AT32AP7002 in briefCPUDebugCachesMMUSystemMemoryAVR32, 150MHzPixel-Coprocessor16-layer AHB MatrixJTAG / Nexus Class III16K-I, 16K-DyesFlash -SRAMExt. Bus interfaceBootUSB UDPUHPU(S)ARTSPITWI (I²C)SSC2 x 16KB8/16/32-bit static,16/32-bit dynamic,NAND (ECC), CompactFlashCommunicationEBI CS01 USB2.0 HS Device4 with DMA2 with DMA1 (Master)3 with DMAAT32AP7002 Blockdiagram16-bitTimer6 x with Cap/ComRTT 1Watchdog 1PWM4 ch / 20-bitMultimediaLCD Contr.2048 x 2048 24-bitCamera IF 1MMC IF 1Audio DAC 1AC97 1Misc.PS2 1I/OOscillatorsSystem160 max.2 x Osc., 2 x PLLPOR, Shut Down Ctrl.AT32AP7000 Development ToolsAP7000 is supported by the ATSTK1000 evaluation kit and AT90JTAGICE-mkIIdebugger. Also an ultra low-cost Network Reference Design Kit ATNGW100 withpre-installed Linux Image is available.All related Software and documentation may be downloaded via www.atmel.com/products/avr32 :- Ready to use example projects- Linux demonstration software- Getting Started Application Notes- Schematics, BOM and Gerber files- Free Atmel tools (Linux Kernel and BSP)ATSTK1000 is equipped with AT32AP7000-CTUT (CTBGA).MSC’s AT32AP7000-Startup Paket gives you all you need for your first AP7000design: ATSTK1000, AT90JTAGICE-mkII. The BSP and Linux Kernel is supported byAtmel and can be downloaded free of cost.Evaluation BoardsATSTK1000 ResourcesSDRAM8MByteFlash8MByteSD-Card256MByteATNGW100 ResourcesSDRAM32MByteFlash8MByteDataFlash8MByteSchematics, BOM, Gerber etc. provided by Atmel.6