ska phase 1 system requirements specification - The Square ...

WP2‐005.030.000‐SRS‐002Revision : B3.9.3 Pointing accuracyThe mechanical and electronic pointing accuracy requirements of the dishes and the AAs are listedbelow.Ident Requirement Applicability Parent VerificationSYS_REQ_1950Dish beam absolute pointingaccuracy. The pointing accuracyof the dish beams is: TBDTBDIdent Requirement Applicability Parent VerificationSYS_REQ_1960AA beam absolute pointingaccuracy. The pointing accuracyof the AA beams is: TBDTBD3.9.4 Pointing estimation accuracyThe mechanical and electronic pointing estimation accuracy requirements of the dishes and the AAs,are listed below.Ident Requirement Applicability Parent VerificationSYS_REQ_1970Dish beam pointing estimationaccuracy. The pointing estimationaccuracy of the dish beams is:TBDTBDIdent Requirement Applicability Parent VerificationSYS_REQ_1980AA beam pointing estimationaccuracy. The pointing estimationaccuracy of the AA beams is: TBDTBD3.10 Monitoring and Control (M&C) FunctionMonitoring And Control is a central system responsible for acquiring monitoring data and for controlof the SKA1 systems. It has a level of autonomy and its sub‐systems are distributed to local areas.3.10.1 Top‐level requirementsIdent Requirement Applicability Parent VerificationSYS_REQ_2110M&C. SKA 1 shall provide amonitoring and control function.TBD2011‐02‐14 Page 21 of 58