ska phase 1 system requirements specification - The Square ...

WP2‐005.030.000‐SRS‐002Revision : BIdent Requirement Applicability Parent VerificationSYS_REQ_2740Fly’s eye mode. SKA1 shallprovide a fly’s eye mode (TBC). Inthis mode the Autocorrelations ofall single dishes / aperture(sub)arrays are recorded. Eachdish / sub‐array is tracking adifferent position on the sky.TBDIdent Requirement Applicability Parent VerificationSYS_REQ_2750Aggregate mode. SKA1 shallprovide an aggregate mode inwhich bandwidth is exchanged forspatial coverage in the correlator.TBDIdent Requirement Applicability Parent VerificationSYS_REQ_2760Real‐time calibration. SKA1 shallprovide instrumental real‐timecalibration functions in allobservational modes.TBDIdent Requirement Applicability Parent VerificationSYS_REQ_2770Re‐processing archive data. Itshall be possible to re‐processdata retrieved from archive. Towhich extent this will besupported needs furtherdiscussion.TBD3.12.2 Data ProductsIdent Requirement Applicability Parent VerificationSYS_REQ_2810Automated data products. SKA1shall be able to produce final dataproducts based on automatedand interactive (manual)processing of acquired data.TBDIdent Requirement Applicability Parent VerificationSYS_REQ_2820Data product types. SKA1 shallproduce recordable intermediatedata products, for example pulsarvoltage time series and RFIstatistics.TBD2011‐02‐14 Page 27 of 58