ska phase 1 system requirements specification - The Square ...
ska phase 1 system requirements specification - The Square ...
ska phase 1 system requirements specification - The Square ...
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
WP2‐005.030.000‐SRS‐002Revision : B4.3 Start‐up and shutdownThis section gives <strong>system</strong> level <strong>requirements</strong> for SKA 1 start‐up and shutdown, including check‐out atinitialization.Ident Requirement Applicability Parent VerificationSYS_REQ_3160Full remote control. It shall bepossible to control all SKA1functions from the operationalcentre, without requiring physicalaccess to the instrument,including start‐up and shut down.TBDIdent Requirement Applicability Parent VerificationSYS_REQ_3170Start‐up sequence. <strong>The</strong> start‐upof SKA1 functions shall follow apre‐defined sequence taking notlonger than:10 minutes for a hot start (=restart)24 hours for a cold startTBDTo be added: definition of hot and cold start.Ident Requirement Applicability Parent VerificationSYS_REQ_3180Start‐up and shut‐downindividual antenna <strong>system</strong>s. Itshall be possible to start‐up orshutdown individual dishes oraperture arrays withoutdisturbance [TBC] of routineoperations.TBDIdent Requirement Applicability Parent VerificationSYS_REQ_3190Shut‐down sequence. <strong>The</strong>shutdown of SKA1 shall follow apre‐defined sequence taking notlonger than TBD minutes. SKA1shall also have an emergencyshut‐down for wind (stowingdishes), lightning, and electricpower anomalies.TBD2011‐02‐14 Page 29 of 58