Lista Technical Electronic Workstations

Technical Electronic and Align ® Workstation WorksurfacesLista worksurfaces are alleasy to maintain, rugged, anddurable.Worksurfaces come in 48",60", 72", 84", 90" and 96"lengths, and are 24", 30" or 36"deep, depending on worksurface.Other sizes are available,and certain worksurfaces areavailable with a bullnose frontedge.Ball Transfer WorksurfacesBall transfer worksurfaces offer a costeffective, efficient means of workflowmanagement for products or pallets inan assembly, repair or rework environment.Please contact your Lista representativefor help in configuring asystem and providing the solution bestsuited to your requirements.Plastic LaminateParticle board core with plastic laminatedtop and sides. 1 9 ⁄16" thick. Dovegray is standard but other colors areavailable on request. Avail able instandard square edge or bullnose frontedge (shown above). To order a bullnoseedge, add “BN” to the end of thepart number.PART NO. LENGTH24" deepPTOP-4824 48"PTOP-6024 60"PTOP-7224 72"PTOP-8424* 84"PTOP-9024* 90"PTOP-9624* 96"30" deepPTOP-48 48"PTOP-60 60"PTOP-72 72"PTOP-84* 84"PTOP-90* 90"PTOP-96* 96"36" deepPTOP-4836 48"PTOP-6036 60"PTOP-7236 72"PTOP-8436* 84"PTOP-9036* 90"PTOP-9636* 96"*requires additional support (third leg or hatsection stiffener)Phenolic ResinA high-pressure laminate designed forlab oratory worksurfaces. Resistant tochemicals, stains or discoloration.Worksurface is 1" thick phenolic resin,available in black.PART NO. SIZERTOP-48 48" long x 30" deepRTOP-60 60" long x 30" deepRTOP-72* 72" long x 30" deepRTOP-84* 84" long x 30" deepRTOP-90* 90" long x 30" deepRTOP-96* 96" long x 30" deep*requires additional support (third leg or hatsection stiffener)Static Dissipative PlasticLaminateParticle board core with plastic laminatedtop and sides, 1 9 ⁄16" thick.Grounding bolt and 10' grounding cordwith a 1 megohm resistor included.Standard color is dove gray but othercolors available on request. Available instandard square edge or bullnose frontedge (shown above). To order a bullnoseedge, add “BN” to end of partnumber.Worksurfaces display electrical propertieswithin static dissipative boundariesof 10 6 -10 9 ohms over a wide range ofrelative humidities (ranging from 60%RH to as low as 10% RH) to meet ESDspecifications. Meets EOS/ESD S4.1specifications. For detailed specifications,please contact Lista.PART NO. LENGTH24" deepSDTOP-4824 48"SDTOP-6024 60"SDTOP-7224 72"SDTOP-8424* 84"SDTOP-9024* 90"SDTOP-9624* 96"30" deepSDTOP-48 48"SDTOP-60 60"SDTOP-72 72"SDTOP-84* 84"SDTOP-90* 90"SDTOP-96* 96"36" deepSDTOP-4836 48"SDTOP-6036 60"SDTOP-7236 72"SDTOP-8436* 84"SDTOP-9036* 90"SDTOP-9636* 96"*requires additional support (third leg or hatsection stiffener)Butcher BlockSatin finish 1 3 ⁄4" thick hardwood.Available in standard square edge orbullnose front edge (shown above). Toorder a bullnose edge, add “BN” to theend of the part number.PART NO. LENGTH24" deepBTOP-4824 48"BTOP-6024 60"BTOP-7224 72"BTOP-8424 84"BTOP-9024 90"BTOP-9624 96"30" deepBTOP-48 48"BTOP-60 60"BTOP-72 72"BTOP-84 84"BTOP-90 90"BTOP-96 96"36" deepBTOP-4836 48"BTOP-6036 60"BTOP-7236 72"BTOP-8436 84"BTOP-9036 90"BTOP-9636 96"Static DissipativeWorksurface AccessoriesESD Isolation KitsRequired to prevent a redundantground (ground loop) with cabinet/worksurface grounding system.Necessary when powered items areused with either non-ESD paintedNexus accessories, ESD paintedNexus accessories with static dissipativeworksurfaces, or powered instrumentriser shelves on staticdissipative worksurfaces.PART NO.ESDISO-KIT/IRSSDESCRIPTIONinstrument risershelf isolation kitWorksurface Grounding KitKit is supplied with all static dissipativeworksurfaces.PART NO.DESCRIPTIONGCT8' cord w/1 megohm resistor42