Lista Technical Electronic Workstations

Lista Technical Electronic WorkstationsArizona State University’sArchitecture Department hasequipped a number of its studentwork areas with versatile Listatech nical electronic workstations.The workstations’ attractivedesign, wealth of availableaccessories and configurabilityhave made them a popular solutionwith both students and staff.

Featuring a sleek, aestheticallypleasing design, the realbeauty of Lista’s technical electronicworkstations is their abilityto perfectly suit the widestvariety of applications.Our modular approach is thekey to our technical electronicworkstation’s versatility, withflexible standard componentsand accessory options bothabove and below the worksurface,leading to greater productivityand efficiency.Many configurations featurea built-in electrical power supply,conveniently located oneither an instrument riser or asa part of the Nexus accessorysystem (for more on the Nexussystem, see pages 76-85).Choose from a wide array ofstatic-safe components, includingESD paint, worksurfacesand shelves, conductive plasticboxes and grounding accessories.Technical electronic workstationshave a 1,000 lb.(454kg) weight capacity, andcan be configured with a varietyof leg and cabinet pedestalchoices, including mobile basesfor increased flexibility andease of reconfiguration. Mobileworkstations can be quicklymoved to and from a work site.Wide choice of above-work -surface accessoriesAccess to electrical power availableon instrument risers andNexus Accessory SystemDurable worksurfaces come inmultiple lengths and depths, in achoice of materials, including ESDFront and rear top support railsprotect integrity of worksurfaceChoice of pedestal and leg supports,including Tech Leg, TechPanel Leg and a large selection ofcabinet pedestalsChoice of leveling glides ormobile casters (for 4-legconfigurations)39

Workstations with 1 Leg,1 Customer-Specified Cab.Overall bench height including worksurface is 35 1 ⁄4". Includes:• 1 tech panel leg (leg 33 1 ⁄2" high)• 1 pair of top support rails• 1 stringer• cabinet pedestal chosen by customerWorkstations with 2 CabinetsOverall bench height including worksurface is 35 1 ⁄4". Includes:• 1 NW0600-0402NA-F6KA cabinet*• 1 NW0600-0202NA-F6KA cabinet**includes keyed-alike locksOverall bench height including worksurface is 35 1 ⁄4". Includes:• 1 NW0600-0501NA-F6KA cabinet*• 1 NW0600-0201N-F6KA cabinet**includes keyed-alike locksWorkstations with2 Customer-SpecifiedCabinetsOverall bench height including worksurface is 35 1 ⁄4". Includes:• 2 cabinet pedestals chosen bycustomerPART NO.TB0300-■■■PART NO.TB3400-■■■PART NO.TB3500-■■■PART NO.TB0600■■■PART NO. INCLUDESTB0301-■■■ 12" adj. riser shelf w/back stopworkstation back stopPART NO. INCLUDESTB3401-■■■ 12" adj. riser shelf w/back stopworkstation back stopPART NO. INCLUDESTB3501-■■■ 12" adj. riser shelf w/back stopworkstation back stopPART NO. INCLUDESTB0601-■■■ 12" adj. riser shelf w/back stopworkstation back stop■■■■■■■■■■■■■■■■■■■■■■■■PART NO. INCLUDESTB0302-■■■ (2) 16" instrument risersupports (1 with power)12" deep instru. riser shelfworksta. + shelf back stopsPART NO. INCLUDESTB3402-■■■ (2) 16" instrument risersupports (1 with power)12" deep instru. riser shelfworksta. + shelf back stopsPART NO. INCLUDESTB3502-■■■ (2) 16" instrument risersupports (1 with power)12" deep instru. riser shelfworksta. + shelf back stopsPART NO. INCLUDESTB0602-■■■ (2) 16" instrument risersupports (1 with power)12" deep instru. riser shelfworksta. + shelf back stops------------------------------------------------------------------------------------------------------------PART NO. INCLUDESTB0303-■■■ 15" deep station. riser shelfwith louvered back panel(2) 16" high overhead cabswith retractable doors**48" long benches include (1) overhead cabinetPART NO. INCLUDESTB3403-■■■ 15" deep station. riser shelfwith louvered back panel(2) 16" high overhead cabswith retractable doors**48" long benches include (1) overhead cabinet■ GG (Green paint) ■ LG (Light Gray paint) ■ NR (Red paint) ■ SN (Sand paint) ■PART NO. INCLUDESTB3503-■■■ 15" deep station. riser shelfwith louvered back panel(2) 16" high overhead cabswith retractable doors**48" long benches include (1) overhead cabinetFW (White paint)PART NO. INCLUDESTB0603■■■ 15" deep station. riser shelfwith louvered back panel(2) 16" high overhead cabswith retractable doors**48" long benches include (1) overhead cabinet41

Technical Electronic and Align ® Workstation WorksurfacesLista worksurfaces are alleasy to maintain, rugged, anddurable.Worksurfaces come in 48",60", 72", 84", 90" and 96"lengths, and are 24", 30" or 36"deep, depending on worksurface.Other sizes are available,and certain worksurfaces areavailable with a bullnose frontedge.Ball Transfer WorksurfacesBall transfer worksurfaces offer a costeffective, efficient means of workflowmanagement for products or pallets inan assembly, repair or rework environment.Please contact your Lista representativefor help in configuring asystem and providing the solution bestsuited to your requirements.Plastic LaminateParticle board core with plastic laminatedtop and sides. 1 9 ⁄16" thick. Dovegray is standard but other colors areavailable on request. Avail able instandard square edge or bullnose frontedge (shown above). To order a bullnoseedge, add “BN” to the end of thepart number.PART NO. LENGTH24" deepPTOP-4824 48"PTOP-6024 60"PTOP-7224 72"PTOP-8424* 84"PTOP-9024* 90"PTOP-9624* 96"30" deepPTOP-48 48"PTOP-60 60"PTOP-72 72"PTOP-84* 84"PTOP-90* 90"PTOP-96* 96"36" deepPTOP-4836 48"PTOP-6036 60"PTOP-7236 72"PTOP-8436* 84"PTOP-9036* 90"PTOP-9636* 96"*requires additional support (third leg or hatsection stiffener)Phenolic ResinA high-pressure laminate designed forlab oratory worksurfaces. Resistant tochemicals, stains or discoloration.Worksurface is 1" thick phenolic resin,available in black.PART NO. SIZERTOP-48 48" long x 30" deepRTOP-60 60" long x 30" deepRTOP-72* 72" long x 30" deepRTOP-84* 84" long x 30" deepRTOP-90* 90" long x 30" deepRTOP-96* 96" long x 30" deep*requires additional support (third leg or hatsection stiffener)Static Dissipative PlasticLaminateParticle board core with plastic laminatedtop and sides, 1 9 ⁄16" thick.Grounding bolt and 10' grounding cordwith a 1 megohm resistor included.Standard color is dove gray but othercolors available on request. Available instandard square edge or bullnose frontedge (shown above). To order a bullnoseedge, add “BN” to end of partnumber.Worksurfaces display electrical propertieswithin static dissipative boundariesof 10 6 -10 9 ohms over a wide range ofrelative humidities (ranging from 60%RH to as low as 10% RH) to meet ESDspecifications. Meets EOS/ESD S4.1specifications. For detailed specifications,please contact Lista.PART NO. LENGTH24" deepSDTOP-4824 48"SDTOP-6024 60"SDTOP-7224 72"SDTOP-8424* 84"SDTOP-9024* 90"SDTOP-9624* 96"30" deepSDTOP-48 48"SDTOP-60 60"SDTOP-72 72"SDTOP-84* 84"SDTOP-90* 90"SDTOP-96* 96"36" deepSDTOP-4836 48"SDTOP-6036 60"SDTOP-7236 72"SDTOP-8436* 84"SDTOP-9036* 90"SDTOP-9636* 96"*requires additional support (third leg or hatsection stiffener)Butcher BlockSatin finish 1 3 ⁄4" thick hardwood.Available in standard square edge orbullnose front edge (shown above). Toorder a bullnose edge, add “BN” to theend of the part number.PART NO. LENGTH24" deepBTOP-4824 48"BTOP-6024 60"BTOP-7224 72"BTOP-8424 84"BTOP-9024 90"BTOP-9624 96"30" deepBTOP-48 48"BTOP-60 60"BTOP-72 72"BTOP-84 84"BTOP-90 90"BTOP-96 96"36" deepBTOP-4836 48"BTOP-6036 60"BTOP-7236 72"BTOP-8436 84"BTOP-9036 90"BTOP-9636 96"Static DissipativeWorksurface AccessoriesESD Isolation KitsRequired to prevent a redundantground (ground loop) with cabinet/worksurface grounding system.Necessary when powered items areused with either non-ESD paintedNexus accessories, ESD paintedNexus accessories with static dissipativeworksurfaces, or powered instrumentriser shelves on staticdissipative worksurfaces.PART NO.ESDISO-KIT/IRSSDESCRIPTIONinstrument risershelf isolation kitWorksurface Grounding KitKit is supplied with all static dissipativeworksurfaces.PART NO.DESCRIPTIONGCT8' cord w/1 megohm resistor42

Technical Electronic Workstation Below-Worksurface ComponentsTech Legs2" x 2" tube leg pairwith cross piece. Legsinclude glides for levelingon uneven surfaces.Top supportrails are requiredfor all workstationconfigurationswhich include TechLeg(s) (not included).PART NO. WORKSURFACE DEPTH27 1 ⁄2" (700mm) highWBTL27.5X22.5 24" (610mm)WBTL27.5X28.5 30" (762mm)WBTL27.5X34.5 36" (915mm)33 1 ⁄2" (850mm) highWBTL33.5X22.5 24" (610mm)WBTL33.5X28.5 30" (762mm)WBTL33.5X34.5 36" (915mm)Tech Panel LegsSame basic constructionas the Tech Legwith a formed panelwelded in place.Includes levelingglides. Top supportrails are required forall workstation configurationswhichinclude Tech Panel Leg(s) (notincluded).PART NO. WORKSURFACE DEPTH27 1 ⁄2" (700mm) highWBTL /P27.5X22.5 24" (610mm)WBTL /P27.5X28.5 30" (762mm)WBTL /P27.5X34.5 36" (915mm)33 1 ⁄2" (850mm) highWBTL /P33.5X22.5 24" (610mm)WBTL /P33.5X28.5 30" (762mm)WBTL /P33.5X34.5 36" (915mm)Tech LegMobileCastersPair of casters usedto add mobility toTech Legs and Tech Panel Legs. Swivelstem casters are 5" x 1 1 ⁄4" and replaceglides which come with stationary legs.Tech Legs with mobile casters can notbe paired with a cabinet pedestal.PART NO.WBTL/CAST5WBWBTL/CAST5NBDESCRIPTIONpair, with wheel brakepair, w/o wheel brakeTech LegExtendersPair of extenders isused to add additionalheight adjustmentfor stationaryTech Legs and TechPanel Legs. Adds upto 6" in height in 1" increments.Extender accepts glides for levelingand/or additional height adjustment.PART NO.WBTL / EXT6DESCRIPTIONpairTop Support RailsPair of rails support front and back ofwork surface to protect integrity of top.Required for all technical electronicworkstations with at least one leg.Not for use with workstations with2 cabinet pedestals. Comes as pair.PART NO.WORKSURF. LENGTHWBTSC48/■■ 48"WBTSC60/■■ 60"WBTSC72/■■ 72"WBTSC84/■■ 84"How to order top supportrails1. Select part number based onworksurface length.2. ■ Specify left-hand (facing theworkstation) bench support.TL = Tech Leg or Panel LegNW* = NW cabinetMP* = MP cabinet3. ■ Specify right-hand (facingthe workstation) bench support.TL = Tech Leg or Panel LegNW* = NW cabinetMP* = MP cabinetEXAMPLE: to order a pair of topsupport rails for a workstation witha 72" worksurface, an MP Widthcabinet as the left-hand pedestaland a Tech Leg as the right-handsupport, the part number would beWBTSC72/MPTL.*top support rail not used to supportworksurface of workstations with2 cabinet pedestalsStringers/Foot RestsTelescoping heavy gauge U channel with2 mounting holes on each end plate.PART NO.WORKSURF. LENGTHWBLST48/■■ 48"WBLST60/■■ 60"WBLST72/■■ 72"WBLST84/■■ 84"WBLST90/■■ 90"WBLST96/■■ 96"Bottom ShelvesTelescoping heavy gauge steel shelf,12" deep, for use as storage or foot rest.150 lb. weight capacity for evenly distributedloads, except as noted.PART NO.WORKSURF. LENGTHWBLBS48/■■ 48"WBLBS60/■■ 60"WBLBS72/■■ 72"WBLBS84/■■ 84"WBLBS90/■■* 90"WBLBS96/■■* 96"*100 lb. weight capacityHow to order stringers andbottom shelves1. Select part number based onworksurface length.2. ■ Specify left-hand (facing theworkstation) bench support.TLNWMP= Tech Leg or Panel Leg= NW cabinet= MP cabinet3. ■ Specify right-hand (facingthe workstation) bench support.TLNWMP= Tech Leg or Panel Leg= NW cabinet= MP cabinetEXAMPLE: to order a bottom shelffor a workstation with a 72" worksurface,an MP Width cabinet as theleft-hand pedestal and a Tech Leg asthe right-hand support, the partnumber would be WBLBS72/MPTL.Privacy PanelsSteel panel attaches to leg or cabinetand runs full length of worksurface.22 3 ⁄4" high.PART NO.WORKSURF. LENGTHWBLPP22.8X48 48"WBLPP22.8X60 60"WBLPP22.8X72 72"WBLPP22.8X84 84"WBLPP22.8X90 90"WBLPP22.8X96 96"Wrist Strapand GroundBlockMounts to under -side of work surface.Dual receptacles for2 wrist straps.PART NO. DESCRIPTIONGB ground blockWS wrist strap with 6' coil cord** with 1 megohm resistorGround KitsKit is supplied with all static dissipativeworksurfaces or shelves. Includes attachinghardware.PART NO. DESCRIPTIONGCT worksurface kit with 8' cord*GCS shelf kit with 6' cord*** with 1 megohm resistor** without 1 megohm resistorCabinet PedestalsFor a selection of drawer cabinetsto serve as pedestals for technicalelectronic workstations, see pages60-69.43

Technical Electronic Workstation Above-Worksurface AccessoriesBack Stops and End StopsSteel back stops and end stops haverounded corners. Stops extend approximately3" above the worksurface. Foruse with worksurfaces or shelves.Back StopsPART NO. WORKSURFACE LENGTHWBTBS-48 48"WBTBS-60 60"WBTBS-72 72"WBTBS-84 84"WBTBS-90 90"WBTBS-96 96"End Stops (pair)PART NO. WORKSURFACE DEPTHWBTES-22 24"WBTES-28 30"WBTES-34 36"Adjustable Riser ShelfAssembliesShelves measure 1 1 ⁄4" thick x 12" deep.Shelf height can be adjusted in 1 1 ⁄2"increments from 12"-18". A steel backstop is available for the shelf assembly(ordered separately – see above).Includes the number of adjust able supportbrackets shown in the charts.Assemblies with PlasticLaminate ShelfPART NO. WKSURF. LGTH. # SUPPORTSARS48P 48" 2ARS60P 60" 2ARS72P 72" 2ARS84P 84" 3ARS90P 90" 3ARS96P 96" 3Assemblies w/Butcher Block ShelfPART NO. WKSURF. LGTH. # SUPPORTSARS48B 48" 2ARS60B 60" 2ARS72B 72" 2ARS84B 84" 2ARS90B 90" 3ARS96B 96" 3Adjustable Support BracketBracket supports riser shelf. May berequired to supplement the supportsincluded with shelf assemblies (seecharts above) for support of longshelves or shelves carrying heavy loads.Instrument Riser ShelfSupportsEither 16", 20" or 24" high, withremovable side panels. 20" and 24"models provide extra space to run airlines or meet additional power requirements.Ordered individually. Shelvesordered separately (see right). Seepage 42 for isolation kits when usedwith static dissipative worksurfaces.16" High SupportsPART NO. DESCRIPTIONIRSS16 no powerIRSS16/15 with 15 ampIRSS16/20 with 20 ampIRSS16/GF-15 with 15 amp GFCIIRSS16/GF-20 with 20 amp GFCILista recommends using a third centersupport with 84", 90" and 96" shelves20" High SupportsPART NO. DESCRIPTIONIRSS20 no powerIRSS20/15 with 15 ampIRSS20/20 with 20 ampIRSS20/GF-15 with 15 amp GFCIIRSS20/GF-20 with 20 amp GFCILista recommends using a third centersupport with 84", 90" and 96" shelves24" High SupportsPART NO. DESCRIPTIONIRSS24 no powerIRSS24/15 with 15 ampIRSS24/20 with 20 ampIRSS24/GF-15 with 15 amp GFCIIRSS24/GF-20 with 20 amp GFCILista recommends using a third centersupport with 84", 90" and 96" shelvesOverhead CabinetsFor a selection of overhead cabinetsfor additional storage above instrumentriser shelves, see our GeneralStorage Catalog.Riser ShelvesAll shelves measure 1 1 ⁄4" thick x 12"or 15" deep and mount to shelf supports.Add “12” or “15” in place of thegreen box (■) in the part number tospecify a shelf depth of 12" or 15".Back stops for shelves can be orderedfrom the chart to left.Plastic Laminate ShelvesPART NO. LENGTHPS48 ■ 48"PS60 ■ 60"PS72 ■* 72"PS84 ■** 84"PS90 ■** 90"PS96 ■** 96"*Lista recommends using a back stop orthird center support with 72" shelves**Lista recommends using a third centersupport with 84", 90" and 96" shelvesStatic Dissipative PlasticLaminate ShelvesComes with grounding bolt andgrounding cord. See page 42 for staticdissipative specifications.PART NO. LENGTHSD48 ■ 48"SD60 ■ 60"SD72 ■* 72"SD84 ■** 84"SD90 ■** 90"SD96 ■** 96"*Lista recommends using a back stop orthird center support with 72" shelves**Lista recommends using a third centersupport with 84", 90" and 96" shelvesButcher Block ShelvesPART NO. LENGTHBS48 ■ 48"BS60 ■ 60"BS72 ■ 72"BS84 ■* 84"BS90 ■* 90"BS96 ■* 96"*Lista recommends using a third centersupport with 84", 90" and 96" shelvesAbove-worksurface accessoriesusing the Nexus System areshown on pages 76-85.Instrument Riser ShelfRear PanelsFull rear panel extends from worksurfaceto form back panel between theworksurface and riser shelf. Availableflush with the shelf or with a 2" backstop for the riser shelf.PART NO.Flush with shelfIRS-FRP■■IRS-FRP■■-PIRS-FRP■■-LWith 2" back stopIRS-FRP■■-2IRS-FRP■■-2PIRS-FRP■■-2LDESCRIPTIONsolid rear panelpegboard rear panellouvered rear panelsolid rear panelpegboard rear panellouvered rear panelHow to order a rear panel1. Select part number.2. ■ Specify shelf length.48 = 48" long60 = 60" long72 = 72" long84 = 84" long90 = 90" long96 = 96" long3. ■ Specify shelf supportheight.16 = 16" high20 = 20" high24 = 24" highEXAMPLE: to order a pegboardrear panel for a 60" long shelf with16" shelf supports, the part numberis IRS-FRP6016-P.44PART NO.ARS-BR

How to Order Technical Electronic Workstation Custom Configurations3These are the basic stepsrequired for ordering custom31233■■■■■technical electronic work -stations.TO ORDER AN EASY-ORDERCOMBINATION (WORKSTA-TION WITH PRECONFIG-URED ACCESSORIES), SEEPAGES 40-41.2221 Select worksurfaceSelect the worksurface that best suitsyour needs from the choices on page42. Choose the worksurface length,depth and style that you prefer.2 Select below-worksurfaceaccessories or basesSelect either 2-leg,1-leg-with-cabinet or2-cabinet configuration. Legs, stringers,bottom shelves and privacy panels areshown on page 43. Hanging cabinetsare shown on page 36. To select a cabinetpedestal(s), please see pages 60-69.3 Select aboveworksurfaceaccessoriesSelect the back stop and endstops (page 44), shelves (instrumentriser or adjustable – seepage 44) and/or Nexus Systemcomponents (pages 76-85) thatsuit your needs.4 Select colorsSelect a color from the chart on theback cover. Cabinet housing anddrawer fronts can be different colors,but drawer interiors are always gray.Sample Workstation OrderQTY. PART NO. DESCRIPTION1 PTOP-60BN plastic laminate worksurfacewith bullnose edge 60" x 30"1 WBTL33.5X28.5 Tech Leg1 WBLST60TLNW stringer1 WBTSC60TLNW top support rails (pair)1 NW0600-0402N-F6RGBB Easy-Order cabinet pedestal1 WBTBS-60 workstation back stop1 IRSS20 instrument riser support1 IRSS20/15 instrument riser support1 PS6012 plastic laminate riser shelf1 WBTBS-60 shelf back stopBB bright blue paint1222233333445