Lista Technical Electronic Workstations

Technical Electronic Workstation Above-Worksurface AccessoriesBack Stops and End StopsSteel back stops and end stops haverounded corners. Stops extend approximately3" above the worksurface. Foruse with worksurfaces or shelves.Back StopsPART NO. WORKSURFACE LENGTHWBTBS-48 48"WBTBS-60 60"WBTBS-72 72"WBTBS-84 84"WBTBS-90 90"WBTBS-96 96"End Stops (pair)PART NO. WORKSURFACE DEPTHWBTES-22 24"WBTES-28 30"WBTES-34 36"Adjustable Riser ShelfAssembliesShelves measure 1 1 ⁄4" thick x 12" deep.Shelf height can be adjusted in 1 1 ⁄2"increments from 12"-18". A steel backstop is available for the shelf assembly(ordered separately – see above).Includes the number of adjust able supportbrackets shown in the charts.Assemblies with PlasticLaminate ShelfPART NO. WKSURF. LGTH. # SUPPORTSARS48P 48" 2ARS60P 60" 2ARS72P 72" 2ARS84P 84" 3ARS90P 90" 3ARS96P 96" 3Assemblies w/Butcher Block ShelfPART NO. WKSURF. LGTH. # SUPPORTSARS48B 48" 2ARS60B 60" 2ARS72B 72" 2ARS84B 84" 2ARS90B 90" 3ARS96B 96" 3Adjustable Support BracketBracket supports riser shelf. May berequired to supplement the supportsincluded with shelf assemblies (seecharts above) for support of longshelves or shelves carrying heavy loads.Instrument Riser ShelfSupportsEither 16", 20" or 24" high, withremovable side panels. 20" and 24"models provide extra space to run airlines or meet additional power requirements.Ordered individually. Shelvesordered separately (see right). Seepage 42 for isolation kits when usedwith static dissipative worksurfaces.16" High SupportsPART NO. DESCRIPTIONIRSS16 no powerIRSS16/15 with 15 ampIRSS16/20 with 20 ampIRSS16/GF-15 with 15 amp GFCIIRSS16/GF-20 with 20 amp GFCILista recommends using a third centersupport with 84", 90" and 96" shelves20" High SupportsPART NO. DESCRIPTIONIRSS20 no powerIRSS20/15 with 15 ampIRSS20/20 with 20 ampIRSS20/GF-15 with 15 amp GFCIIRSS20/GF-20 with 20 amp GFCILista recommends using a third centersupport with 84", 90" and 96" shelves24" High SupportsPART NO. DESCRIPTIONIRSS24 no powerIRSS24/15 with 15 ampIRSS24/20 with 20 ampIRSS24/GF-15 with 15 amp GFCIIRSS24/GF-20 with 20 amp GFCILista recommends using a third centersupport with 84", 90" and 96" shelvesOverhead CabinetsFor a selection of overhead cabinetsfor additional storage above instrumentriser shelves, see our GeneralStorage Catalog.Riser ShelvesAll shelves measure 1 1 ⁄4" thick x 12"or 15" deep and mount to shelf supports.Add “12” or “15” in place of thegreen box (■) in the part number tospecify a shelf depth of 12" or 15".Back stops for shelves can be orderedfrom the chart to left.Plastic Laminate ShelvesPART NO. LENGTHPS48 ■ 48"PS60 ■ 60"PS72 ■* 72"PS84 ■** 84"PS90 ■** 90"PS96 ■** 96"*Lista recommends using a back stop orthird center support with 72" shelves**Lista recommends using a third centersupport with 84", 90" and 96" shelvesStatic Dissipative PlasticLaminate ShelvesComes with grounding bolt andgrounding cord. See page 42 for staticdissipative specifications.PART NO. LENGTHSD48 ■ 48"SD60 ■ 60"SD72 ■* 72"SD84 ■** 84"SD90 ■** 90"SD96 ■** 96"*Lista recommends using a back stop orthird center support with 72" shelves**Lista recommends using a third centersupport with 84", 90" and 96" shelvesButcher Block ShelvesPART NO. LENGTHBS48 ■ 48"BS60 ■ 60"BS72 ■ 72"BS84 ■* 84"BS90 ■* 90"BS96 ■* 96"*Lista recommends using a third centersupport with 84", 90" and 96" shelvesAbove-worksurface accessoriesusing the Nexus System areshown on pages 76-85.Instrument Riser ShelfRear PanelsFull rear panel extends from worksurfaceto form back panel between theworksurface and riser shelf. Availableflush with the shelf or with a 2" backstop for the riser shelf.PART NO.Flush with shelfIRS-FRP■■IRS-FRP■■-PIRS-FRP■■-LWith 2" back stopIRS-FRP■■-2IRS-FRP■■-2PIRS-FRP■■-2LDESCRIPTIONsolid rear panelpegboard rear panellouvered rear panelsolid rear panelpegboard rear panellouvered rear panelHow to order a rear panel1. Select part number.2. ■ Specify shelf length.48 = 48" long60 = 60" long72 = 72" long84 = 84" long90 = 90" long96 = 96" long3. ■ Specify shelf supportheight.16 = 16" high20 = 20" high24 = 24" highEXAMPLE: to order a pegboardrear panel for a 60" long shelf with16" shelf supports, the part numberis IRS-FRP6016-P.44PART NO.ARS-BR