TREE ACCESS - Camp

15.02.13TREE ACCESS

216201 TREE ACCESSThe ultimate tree climbing harness: conceived by treeclimbers,tested by tree-climbers!Very comfortable structure, bridge attachment point,possibility to install a EN 361 chest part and a rigid seat.Every single detail has been studied to fit all the treeclimber’sneeds.Maximum user’s weight: 150 kgThe “Tree Access” solution consists of a sit harness (A),a chest harness (B) and a rigid seat (C).Tree Access, Access Chest and Access Swing aresupplied separately, together with instructions forassembling.A EN 358 - EN 813TREE CLIMBING1750SIZE1 S-L2 L-XXL= Attachment element for work positioningB EN 361ROPE ACCESSTREE CLIMBINGB (cm)80-12090-140C (cm)50-6560-75PYLONS/INDUSTRYTECHNICAL SHEET550SIZE1 S-L2 L-XXLD (cm)55-7565-85= Fall arrest attachment elementACROPE ACCESS TREE CLIMBINGSIZE1300ONE SIZEBCA1

POSSIBLE CONFIGURATIONS1. Use of the sit harness only, for tree-climbingapplications where fall arrest function is not required;2. Combination of the chest part with the harness.This solution adds two fall arrest attachment points(front and back) sitable for the connection of a shockabsorbing lanyard or a fall arrest device;3. Connection of a rigid seat for best comfort in midairprolonged suspensions. Possibility to connect theseat on the buckles of the Tree Access harness, or toapply it directly to the ventral ring of any sit harnessby means of two connectors.1TECHNICAL SHEET232

ASit Harness “TREE ACCESS” - Ref.216201Aluminium alloy attachment ring, d.45xD.69 mm, 30 kN.Bridge webbing, double webbing layer for best durability, 25mm wide, 30 cm long (25 cm version available as spare part).Certified according EN 813.Webbings and side buckles for bridge position adjustment,perfect to adjust the user’s position, also during suspension.20 mm wide webbings, aluminium alloy buckles.Stainless steel connection rings with hexagonal screws forreplacements of the bridge webbing.Textile ventral attachment loop, certified according En813.Patented structure. Also used for the connection of AccessChest.Aluminium alloy side rings for work positioning, certifiedaccording En358.New connection system between belt and leg-loops:the high distance between the two connection webbings isstudied for improved comfort un the groin area.“Speedy Alu” automatic buckles.Aluminium alloy belt buckles, fast adjustable and detachablePatented “Sicura” buckles for fastening the “Access Swing”Polyester belt webbings, 44 mm wide.Polyester leg-loops webbings, 33 mm wide.Leg-loops webbing reinforcement.Triple-layer belt padding: comfortable 3D mesh,robust intermediate foam, additional rigid foam layer on loadareas.Large contact area for pressure distribution.Double density leg-loops padding: stiffer on the back for loadsupport, softer on the groin area for comfort. 3D mesh inside.Large contact area for pressure distribution.Rear leg-loops connection webbings, adjustable in length.Buckle for “Access Chest” fastening.Webbing loops for fastening of gear-carabiners “Hub”ref.0910 (supplied separately).Several rigid gear loops on the belt, 10 Kg maxOne gear ring on each leg-loop, 10 Kg maxTECHNICAL SHEETWebbing loop for “Access Swing” fastening when not in use.3

BChest harness “ACCESS CHEST” - Ref.196202Fall arrest attchment points made of aluminium alloy(front and back) certified according EN 361, suitablefor the connection of a shock absorbing lanyard or afall arrest device.Polyester webbings, 44 mm wide.TECHNICAL SHEETAluminium alloy buckles, fast adjustable anddetachable.Screwgate aluminium alloy connector, fastened withsteel pin in order to avoid rotation.To be connected to “Tree Access”.Webbing back connection system to “Tree Access”.Triple-layer padding: comfortable 3D mesh, robustintermediate foam, external protective mesh.Webbing system for chest ascender fastening.4

CRigid seat “ACCESS SWING” - Ref.1963Aluminium alloy structure for best stiffness duringsuspension. Double layer padding made by foamcovered by breathable 3D mesh.Patented “Sicura” buckles conceived to beconnected directly to the buckles on “Tree Access”or “Access Sit”TECHNICAL SHEETWebbing loops for the connection of the seat to theventral attachment ring of any EN813 harness bymeans of two connectors (suggested “Nano 23”ref.1189).Aluminium alloy hook for fastening the seat on theback of “Tree Access”, when not in use.Side gear loops, 10 Kg max.Bottom gear loop, 10 Kg max.Use with “Tree Access”Use with any EN 813 harnessSpare parts for “TREE ACCESS”Bridge Webbing:- Ref.216401 - 25 cm long- Ref.216402 - 30 cm long (standard)Bridge aluminium ring:- Ref.2046 - d.34 x D.54 mm, 22 kN- Ref.204601 - d.45 x 54 mm, 30 kN (standard)5