English - Camp

news2012English

harnessesnews20122120 orbitalen 358 - EN 3611350size A (cm) B (cm) C (cm) D (cm)1 st S-L 80-120 70-110 45-65 55-752 nd L-XXL 90-140 80-130 55-75 65-85Full body harness with 4 attachment points: 1 front, 1 back, 2 side.New conception harness whose structure is especially developed in order toincrease comfort for movements during working and for suspension after fallas well, reducing thus the dangerous effects of suspension trauma.Comfortable padded belt for work positioning,padded fully-adjustable leg-loops.The weight is reduced to the minimum thanks to the use of few metalcomponents: all the attachment points are made with lightweightdouble-layer webbing loops.Two small loops for the application of the suspension trauma straps“HelpStep” ref. 2062 (supplied separately).2 Sizes.2121 quantumEN 361900size A (cm) C (cm) D (cm)1 st S-L 80-120 45-65 55-752 nd L-XXL 90-140 55-75 65-85Full body harness with 2 attachment points: 1 front, 1 back.New conception harness whose structure is especially developed in order toincrease comfort for movements during working and for suspension after fallas well, reducing thus the dangerous effects of suspension trauma.Padded fully adjustable leg-loops.The weight is reduced to the minimum thanks to the use of few metalcomponents: all the attachment points are made with lightweightdouble-layer webbing loops.Two small loops for the application of the suspension trauma straps“HelpStep” ref. 2062 (supplied separately).2 Sizes.3

news2012harnesses941.05 golden top seat alu + 1962.02 access chestsize B (cm) C (cm) D (cm)1 st S-L 70-110 45-65 55-752 nd L-XXL 80-130 55-75 65-85New steel buckle2012 UPDATE: possibility to install the chest harness Access Chest ref. 1962.02.Previous version of Golden Top Seat Alu had the possibility to be assembled with theGolden Chest Alu ref. 930.01, becoming a EN361 full body harness with one frontfall-arrest attachment point only. Installation on the new version of Access Chest permitsto get two EN361 fall-arrest attachment points: front and back.REMARK: installation of Access Chest on Golden Top Seat Alu is possible only with thenew version harness, with carbon steel buckle at the back of the belt. Do not install AccessChest on the previous version with aluminium alloy buckle at the back of the harness.New version can be recognised by the different reference code marked on the CE label:Previous version: 941.05New version: 941.05r1previous versionnew version941.05+930.01Golden Top Seat Alu + Golden Chest AluOne front fall arrest point941.05r1+1962.02Golden Top Seat Alu + Access ChestTwo fall arrest points: front + backEN 358 - en 361 - en 813 EN 358 - en 361 - en 813921.01 golden top plusEN 358 - en 361 - en 813previous versionnew version2000size B (cm) C (cm) D (cm)1 st S-L 70-110 45-65 55-752 nd L-XXL 80-130 55-75 65-852012 UPDATE:- The position of back fall-arrest ring has been changed bringing it about 15 cmhigher so that the suspension position after a fall is much more vertical andmore comfortable.- The back fall-arrest ring is now covered by a new soft plastic crossing platewhich improves the comfort.921.07 golden top plus black4

harnessesnews20122171 Kronos420Suspension harness specifically conceivedfor rescue and police dogs.Suitable for all the dogs usually used for these applications.One size fits all.The innovative structure of the harness allows an idealsuspension position, giving the dog a good comfort duringrescue or police operations.Back part can be easily detached and removed in order touse just the front part during ground operations.High-visibility colours, wide pocket for GPS locator, twopockets for Recco ® reflectors, made of washable materials.Chosen byC.N.S.A.S.Italian Alpine and CavingRescue OrganizationInstallation of dilatation joints on a roof.Vevey, Switzerland (© “Pros en images” for Corde-Access)

news2012energy absorbers - lanyards2092.01 air lanyarden 358430Lanyard for work positioning constructed with robust 19 mm Dyneema ® webbing, it is made of two parts:one section is adjustable in length from 55 to 110 cm by means of fast-adjustment buckles, the other onehas a daisy-chain construction with three different attachment loops and length of 70 cm.Especially developed to be used combined with “Air Rescue” or “Air Work” harnesses, it can be alsoused in combination with any EN813 sit harness.Connection to the harness can be done without any connector: the end loop can be tied directly into theattachment point of the harness. Aluminium alloy connectors.Chosen by995995C.N.S.A.S.Italian Alpine and CavingRescue Organization2093.01 air absorberen 355 - en 958540Fall-arrest lanyard certified for work at height and for via-ferrata progression.Thanks to EN958 certification, it can protect the user against factor 5 falls(maximum height of fall: 5 m).Compact and light shock-absorber made of polyamide webbing, 19 mmDyneema ® webbing lanyards, aluminium alloy connectors.Air Lanyard has been developed to be used in connection with the fall-arrestattachment point of the “Air Rescue” and “Air Work” harnesses; it can also beused attached to any compatible harness. Length 100 cm.9959951115 special6

energy absorbers - lanyardsnews20122061 cable adjusteren 358no cut995model length weight2061.03 0-2 m 1060 g2061.01 0-3.5 m 1480 g2061.02 0-5 m 1900 gWork positioning adjustable lanyard made of galvanizedwire steel cable covered by double polyester sheath.Cable diameter of 8 mm offers an exceptional resistanceto cutting tools and the innovative double sheathconstruction (outer diameter 13 mm) avoids any possibilitythat the sheath slides along the cable. Outer poliurethanecoating gives additional wear-and-tear resistance.Ergonomic adjuster allows a fast and easy lengthadjustment.Aluminium alloy adjustment device and connectors.Three available versions:2061.03: adjustable length up to 2 m.2061.01: adjustable length up to 3.5 m.2061.02: adjustable length up to 5 m.cross section of the cablePolyester outer sheatDiameter: 13 mmPoliurethane coatedPolyester inner sheatavoids outer sheat to slideon the cable2060 cable lanyarden 358no cutGalvanized steel cableDiameter 8 mmConstruction: AZN 6x19model length weight2060.01 3.5 m 1260 g2060.02 5 m 1680 g995Work positioning lanyard made of galvanized wiresteel cable covered by double polyester sheath.Cable diameter of 8 mm offers an exceptionalresistance to cutting tools and the innovativedouble sheath construction (outer diameter13 mm) avoids any possibility that the sheath slidesalong the cable. Outer poliurethane coating givesadditional wear-and-tear resistance.Aluminium alloy connectors.Two available versions:2060.01: length 3.5 m.2060.02: length 5 m.7

news2012anchor devices2140 herbolen 795/bmodel length weight strength2140.01 90 cm 240 g 22 kN2140.02 120 cm 310 g 22 kNCambium saver for creating anchor points on treesor horizontal artificial structures.Two rings with different size and retrieval sphere (d.31 mm) suppliedwith the device allow to install and retrieve “Herbol” and the workingrope directly from the ground, by means of a guiding cord.Stiffness of the webbing has been especially developed in order to fulfilthe needs of tree-climbers. The stiffness of the last section of webbingnear the major ring is further increased by a internal plastic layer.Aluminium alloy rings are anodized with different colours in order to beeasily seen from the ground.Two available versions:2140.01: length 90 cm.2140.02: length 120 cm.2132 anchor cableen 795/b - en 354no cutmodel length weight strength2132.050 50 cm 240 g 32 kN2132.100 100 cm 410 g 32 kN2132.150 150 cm 580 g 32 kN2132.200 200 cm 750 g 32 kNGalvanized wire cable d.7 mm with spliced end loops,covered with plastic protection tube d.15 mm.The perfect solution to create temporary anchor points aroundstructures having rough surfaces or sharp edges;or when using cutting tools.They can be also combined with EN355 shock absorbers in order toget fall-arrest lanyards.Four lengths available.8

new certificationsnews2012rope lanyardsHorizontal use certificationen 355As already done for rope lanyards with Standard Shock Absorber (ref. 50301 and 50302),certification for sharp edge resistance has been carried out also for rope lanyards withShock Absorber Limited (ref. 50401 and 50402).New certification has been got according European test methods CNB/P/11.060 orCNB/P/11.074 (Sharp edge with r>_ 0.5 mm).50301 / 50302Single and double rope lanyardswith absorber ref. 202950401 / 50402Single and doublerope lanyardswith absorber ref. 30292078 cobra 20Horizontal use certificationen 360Horizontal use7As already done for the other two models Cobra 10 and Cobra 15,certification for horizontal use over sharp edges has been carriedout also for Cobra 20, according European test methodCNB/P/11.060 (Type A - sharp edge with r>_ 0.5 mm).Now Cobra 20 can be used also on roofs and terraces, combiningit with the proper lanyard ref. 50301.01 (supplied separately).Lanyard for horizontal use ref. 50301.01(supplied separately)547 Pilot / 550 solo / 1175 liftEN12841 Typo B Certificationen 12841/B - en 5675475501175Certification according Europeanstandard EN12841/B has been carriedout for all the ascenders of the CAMPSafety range.In addition of EN567 certification (ropeclamps), Pilot, Solo and Lift are nowcertified as working line ascendersfor rope access when used withEN1891/A low-stretch ropes rangingfrom 10 to 13 mm in diameter.21014595547.01Left547Right9

news2012helmets - connectorsnew colours of helmetsen 397C.A.M.P. presents one new colour for eachEN397 helmet of the CAMP Safety range:Skylor Plus: Orange.Safety Star: Blue.Silver Star Work: Yellow.211 - Safety Star209 - Skylor Plus220 - Silver Star Work1176 HMS belay locken 362 - en 12275kN23 10 7113 mm24 mm75Screwgate aluminium alloy connector equipped with anadditional patented internal lever.The internal lever is made of polyamide with stainless steel core.The patented lever allows to create an internal ring into theconnector where it is possible to insert the end-loop of alanyard, preventing it from rotating.The wide base of the connector is the perfect solution for theconnection of “A/2” attachment points of a full body harness.2046 access ring10en 354model dimension strength2046 d.34 x D.54 mm 22 kN2046.01 d.45 x D.69 mm 30 kNAluminium alloy rings, useful for the connection of different elements of awork-at-height system. Can be inserted in the central strap of Access Bridgeharness to improve sliding.Made of forged 7075 T6 aluminium alloy, tempered and anodized.2046.0159204634

accessoriesnews20122150 tooler40Tool lanyard made of elastic webbing(length: 85-120 cm). The ideal solutionfor carrying tools safely (max 10 kg) whenworking at height.Aluminium alloy connector.It is developed in order to break at about200-250 kg, so that it will safely break incase of necessity, avoiding any potentialinjury to the user.“Tooler” must not be used as safety lanyard!2151 sawer95Tool lanyard made of elastic webbing(length: 90-135 cm). The ideal solution forcarrying a chainsaw or other tools safely(max 10 kg) when working at height.Aluminium alloy connector.By means of the metal ring the chainsawcan be hung to any gear-carabinerfastened on the harness’ belt.It is developed in order to break at about200-250 kg, so that it will safely break incase of necessity, avoiding any potentialinjury to the user.“Sawer” must not be used as safety lanyard!2195 tools bag2103,5 lBag for carrying tools when working at height. It canbe applied to the harness belt by means of the twoquick links fastened on the back part of the bag. Velcroclosure, elastic tape inside with loops for tools fastening.Dimensions: 15x8xh.31 cm. Capacity: 3.5 litres.It can be applied to the apposite loops or rings of thefollowing CAMP Safety harnesses:Access Sit,Golden Top Evo Alu,Golden Top Comfort Alu,Golden Top Plus Alu,Golden Top Seat Alu,Golden Top Plus,Golden Top,Liberty,Gravity,Orbital,Rapida Plus,Vertical 2 Plus,Basic Evo,Easy Belt.11

news2012use of camp safety equipmentUse of CAMP Safety equipmentby users with maximum total weight heavier than 100 kgForewordCertification of Personal Protective Equipment for falls fromheight and for work positioning conforming to European Directive89/686/EEC is carried out in accordance with proper harmonizedEN standards.The standards evaluate dynamic strength and/or dynamicperformance through drop tests carried out with a standard massof 100 kg; drop tests by the manufacturer with a heavier massmay be performed in some cases to determine if the equipmentis suitable and safe for use by heavier users.The C.A.M.P. R&D Department carried out a series of tests in orderto determine whether and how CAMP Safety equipment can besafely used by users with a total weight of more than 100 kg.Static strengthThe minimum static strength required by harmonized ENstandards and declared by C.A.M.P. guarantees complete safetyfor workers weighing up to 150 kg. In fact, all breaking loads forCAMP P.P.E. are higher than 15 kN (1500 kg approx.), and insome cases up to 52 kN (5200 kg approx.), so the breaking loadis always at least 10 times higher than the weight of the user.Dynamic performance and dynamic strengthIn order to guarantee the safety of the user, EN standards requirethat in a fall-arrest system, the fall-arrest force transmitted to theuser’s body must be kept below 6 kN (600 kg approx.).This force limitation is defined by the current EN standards as thelimit that prevents any major injury to the user.Concerning the additional drop tests with a mass up to 150 kg, theC.A.M.P. R&D Dept. has considered this requirement of 6 kN as themaximum limit value to be respected during dynamic performancetests, prescribed for all devices having an energy absorbingfunction (i.e. energy absorbers, retractable fall arresters, rope fallarresters, cable fall arresters, etc.).Test results also identified all the additional safety instructionsin order to guarantee the absorption of the increased energygenerated during a fall of a person weighing up to 150 kg.With reference to the components of systems designedspecifically for work positioning or rescue (equipment notdesigned for fall arrest), the C.A.M.P. R&D Dept. carried out (witha mass up to 150 kg) all the drop tests necessary to verify that theequipment meets the dynamic strength requirements prescribedby EN standards. The EN standards for work positioning andrescue equipment do not give any specific force limit(s) duringa fall, rather they instruct the user to avoid any fall(s) when usingpositioning or rescue equipment.Instructions for useThe dynamic performance and dynamic strength tests carried outby the C.A.M.P. R&D Dept. provide all of the necessary data toindicate the safety instructions and limitations of systems that useCAMP Safety equipment for users weighing up to 150 kg.The charts on the following pages provide additional instructionsfor every type of CAMP Safety product.1. The first column reports a short summary of the prescribed ENstandards for the user’s maximum weight.2. The second column indicates the test results for each typeof equipment to determine whether it can be used by peoplewith a total weight between 100 and 120 kg. It also providesadditional instructions and limitations in order to guarantee thecorrect and safe use of the equipment such as the minimumclearance distance required to prevent the user from hitting theground during a fall.3. The third column gives the same instructions as the secondcolumn for users with a total weight between 120 and 150 kg.4. The fourth column lists all of the products for which theadditional instructions and test results are valid.Indications given by the chart can be summarized using thecolour coding as defined below:use is authorized without additional safety instructionsuse is authorized only with additional safety instructionsuse is not authorizedConclusionsC.A.M.P. authorizes the use of specific CAMP Safety productsin fall-arrest, work positioning and rescue systems for users witha maximum total weight heavier than 100 kg (maximum 150 kg,fully equipped) only if:- the choice of the proper equipment is done by consulting thechart supplied with this document, and by professionals trainedin the specified weight range;- the use of the equipment is done following all the additionalsafety instructions and limitations provided in the chart suppliedwith this document for the specified weight range, in additionto the normal instructions provided with the technical manual(s)supplied with every product;- the fall-arrest system, positioning system, or the rescue systemis assembled exclusively using CAMP Safety equipment whoseuse is authorized for the specified weight range, in addition tothe standard compatibility of the components used togetheras specified by EN standards and technical manual(s) suppliedwith every product.12

use of camp safety equipmentnews2012Use of CAMP Safety equipment by users with maximum total weight heavier than 100 kgInstructionsType ofequipment1. EN Standardsinstructions2. Total Weight 100-120 kg 3. Total Weight 120-150 kg 4. Instructions valid for:HarnessesEN361, EN358,EN813• EN361 standard doesnot prescribe anyweight limit for theuser.• EN358 standard doesnot prescribe anyweight limit for theuser.• EN813 standardprescribes that dynamictests are made withthe maximum weightdeclared by themanufacturer.Use is authorized.• EN361 attachment points for fall-arrestSafety depends on the energy absorbing systemused in combination with the harness:check that the system is suitable for thisweight.• EN358 attachment points for work positioning.Additional tests by C.A.M.P. R&D Dept. withmasses up to 150 kg were successful. Checkthat the devices for work positioning used incombination with the harness are suitable for thisweight.• EN813 attachment points for suspension.Certification was carried out for a weight limit of150 kg.Check that the devices used in combination withthe harness are suitable for this weight.1962.01 Access Sit, 1962.02 Access Chest,1962.03 Access Bridge,941.01 Golden Top Plus Alu,941.02 Golden Top Evo Alu,941.04 Golden Top Comfort Alu,941.05 Golden Top Seat Alu,941.06 Golden Top Evo Fixe Alu,921.01 Golden Top Plus,921.07 Golden Top Plus Black,921 Golden Top, 921.03 Golden Top Black,907 Liberty, 907.03 Liberty Black,930 Golden Chest, 930.01 Golden Chest Alu,1982.01 Air Rescue Sit,1982.02 Air Rescue Chest,1983.01 Air Work Sit,1983.02 Air Work Chest,1265 Gravity, 2120 Orbital, 2121 Quantum,1264 Rapida, 1264.01 Rapida Plus,1264.02 Rapida Light, 1348.02 Vertical 2 Alu,1348.03 Vertical 2 Alu Vest,1247.02 Vertical 2, 1247.03 Vertical 2 Vest,106 Vertical 2 Plus, 1247 Vertical,922 Empire, 922.03 Empire Black,1275 Basic Duo, 1298 Basic,1298.03 Basic Evo, 1268 Easy Belt.Lanyards withShock Absorberref.2029EN355EN355 standard doesnot prescribe any weightlimit for the user.Use is authorized when the length of thelanyard, connectors included, is shorterthan 175 cm.Additional tests by C.A.M.P. R&D Dept. showed thatfor this weight and this length the maximum forceduring the fall is lower than 6 kN and the extensionof the energy absorber is lower than 135 cm.Minimum clearance distance must be 5.6 m belowthe anchor point.Use is authorized when the length of thelanyard, connectors included, is shorterthan 135 cm.Additional tests by C.A.M.P. R&D Dept. showed thatfor this weight and this length the maximum forceduring the fall is lower than 6 kN and the extensionof the energy absorber is lower than 140 cm.Minimum clearance distance must be 5.25 m belowthe anchor point.2029 Shock Absorber,50301 Single Rope Lanyards,50302 Double Rope Lanyards,51301 Adjustable Rope Lanyards,60301 Single Webbing Lanyards,60302 Double Webbing Lanyards,70301 Single Rewind Lanyards,70302 Double Rewind Lanyards.(with maximum length as specified incolumns 2 and 3)Lanyards withShock AbsorberLimited ref.3029EN355EN355 standard doesnot prescribe any weightlimit for the user.Use is authorized when the length of thelanyard, connectors included, is shorterthan 135 cm.Additional tests by C.A.M.P. R&D Dept. showed thatfor this weight and this length the maximum forceduring the fall is lower than 6 kN and the extensionof the energy absorber is lower than 65 cm.Minimum clearance distance must be 4.5 m belowthe anchor point.Use is authorized when the length of thelanyard, connectors included, is shorterthan 100 cm.Additional tests by C.A.M.P. R&D Dept. showed thatfor this weight and this length the maximum forceduring the fall is lower than 6 kN and the extensionof the energy absorber is lower than 80 cm.Minimum clearance distance must be 4.3 m belowthe anchor point.3029 Shock Absorber Limited,50401 Single Rope Lanyards Limited,50402 Double Rope Lanyards Limited,60401 Single Webbing Lanyards Limited,60402 Double Webbing Lanyards Limited.(with maximum length as specified incolumns 2 and 3)Air Absorber EN355EN355 standard doesnot prescribe any weightlimit for the user.Use is authorized.Additional tests by C.A.M.P. R&D Dept. showed thatfor this weight the maximum force during the fallis lower than 6 kN and the extension of the energyabsorber is lower than 70 cm.Total length of the lanyard must be 1 m maximum,do not increase the length with additionalcomponents.Minimum clearance distance must be 4.7 m belowthe anchor point.Use with fall factor higher than 2 is not authorized.Use is authorized.Additional tests by C.A.M.P. R&D Dept. showed thatfor this weight the maximum force during the fallis lower than 6 kN and the extension of the energyabsorber is lower than 87 cm.Total length of the lanyard must be 1 m maximum,do not increase the length with additionalcomponents.Minimum clearance distance must be 4.7 m belowthe anchor point.Use with fall factor higher than 2 is not authorized.2093.01 Air Absorber.Lanyards EN354EN354 standard doesnot prescribe any weightlimit for the user.Use is authorized.When lanyard is used assembled with a energyabsorber for fall-arrest purposes, check that theabsorber is suitable for this weight.2030 Rope Lanyards,2030F Webbing Lanyards, 2041 Doublex,2034 Truck Loop, 2035 Easy Anchor,2032 Anchor Webbing, 2132 Anchor Cable,2046 Access Ring 34 mm,2046.01 Access Ring 45 mm.AdjustableLanyards EN358EN358 standard doesnot prescribe any weightlimit for the user.Use is authorized.Additional tests by C.A.M.P. R&D Dept. with massesup to 150 kg were successful.2030.07/0701 Adjustable Rope Lanyards,2031 Rope Adjuster, 1687 Axel Lanyard,2060 Cable Lanyard, 2061 Cable Adjuster.13

news2012use of camp safety equipmentUse of CAMP Safety equipment by users with maximum total weight heavier than 100 kgInstructionsType ofequipment1. EN Standardsinstructions2. Total Weight 100-120 kg 3. Total Weight 120-150 kg 4. Instructions valid for:Air LanyardEN354EN354 standard doesnot prescribe any weightlimit for the user.Use is authorized.Additional tests by C.A.M.P. R&D Dept. with massesup to 120 kg were successful.Use is NOT authorized.Additional tests by C.A.M.P. R&D Dept. with massesheavier than 120 kg were not successful.2092.01 Air Lanyard.TemporaryAnchor DevicesEN795/BEN795/B standard doesnot prescribe any weightlimit for the user.Use is authorized.Safety depends on the energy absorbing systemused in combination with the device: check that thesystem is suitable for this weight.2034 Truck Loop, 1040 Express Ring,2035 Easy Anchor, 2036 Speed Anchor,2032 Anchor Webbing,250 Daisy Chain Dyneema,1269 Multianchor, 1393 Swivel,2030 Rope Lanyards, 2030F Webbing Lanyards,2140 Herbol, 2132 Anchor Cable.Temporary LifelineEN795/BEN795/B standard doesnot prescribe any weightlimit for the user.Use is authorized.In order to keep the bending of the lifeline into thevalues specified on the technical manual, take thefollowing precautions:- use the lifeline by one person only, consider thebending specified for mass of 200 kg;- check that the system used in combination with theanchor is suitable for this weight.1095 Temporary Lifeline 18 m,1095.01 Temporary Lifeline 30 m.ConnectorsEN362EN362 standard do notprescribe any weightlimit for the user.Use is authorized.Safety depends on the energy absorbing systemused in combination with the connector: check thatthe system is suitable for this weight.2017, 984, 984.01, 1158.01, 1158.02,1158.03, 986, 983, 1877, 1877.01, 1877.02,981, 1878, 925, 1075, 1075.01, 1075.02,1078, 1078.01, 1078.02, 1136, 1183, 1184,1115, 1185, 1187, 1309, 995, CONNETT12,1176, 691, 934, 939, 935, 949, 955, 991,961, 992.Cobra 2RetractableFall ArresterEN360EN360 standard doesnot prescribe any weightlimit for the user.Use with fall factor lower than 1 isauthorized.Additional tests by C.A.M.P. R&D Dept. showed thatfor this weight the maximum force during the fall islower than 6 kN.Minimum clearance distance must be 2.4 m belowuser's feet.Use with fall factor higher than 1 is notauthorized.Use with fall factor lower than 1 isauthorized.Additional tests by C.A.M.P. R&D Dept. showed thatfor this weight the maximum force during the fall islower than 6 kN.Minimum clearance distance must be 2.7 m belowuser's feet.Use with fall factor higher than 1 is notauthorized.2074 Cobra 2.Cobra 10-15-20RetractableFall ArrestersEN360EN360 standard doesnot prescribe any weightlimit for the user.Use is authorized.Certification was carried out for a weight limitof 150 kg.2076 Cobra 10, 2077 Cobra 15,2078 Cobra 20.Axel DescenderEN341EN341 standardprescribes that dynamictests are made withthe maximum weightdeclared by themanufacturer.Use is authorized.Certification was carried out for a weight limitof 150 kg.1686 Axel.I-Block DescenderEN341-EN12841/BEN341 and EN12841standards prescribethat dynamic tests aremade with the maximumweight declared by themanufacturer.Use is authorized.Certification was carried out for a weight limitof 150 kg.For descending in emergency situations by two people(200 kg max.) use additional braking carabiner.1388 I-Block.AscendersEN12841/BEN12841 standardprescribes that dynamictests are made withthe maximum weightdeclared by themanufacturer.Use is authorized.Certification was carried out for a weight limit of100 kg (fall factor 1 drop test with connection bylanyard L=1 m).For use up to 150 kg connection lanyardlength must be limited to 0.5 m and workposition must be always lower than the ascenderposition.550 Solo, 547 Pilot dx, 547.01 Pilot sx,1175 Lift.14

use of camp safety equipmentnews2012Use of CAMP Safety equipment by users with maximum total weight heavier than 100 kgInstructionsType ofequipment1. EN Standardsinstructions2. Total Weight 100-120 kg 3. Total Weight 120-150 kg 4. Instructions valid for:Rope Fall Arresterref.1389EN/353-2EN353-2 standard doesnot prescribe any weightlimit for the user.Use with connection through connectorref. 981 is authorized.Additional tests by C.A.M.P. R&D Dept. with massesup to 150 kg were successful.Minimum clearance distance must be 2 m belowuser's feet.1389 Rope Fall Arrester.Use with connection through energyabsorber ref. 1029.01 is NOT authorized.Additional tests by C.A.M.P. R&D Dept. with massesheavier than 100 kg were not successful.Rope Fall Arresterref.1390EN/353-2EN353-2 standard doesnot prescribe any weightlimit for the user.Use with connection through connectorref. 981 is authorized.Additional tests by C.A.M.P. R&D Dept. with massesup to 150 kg were successful.Minimum clearance distance must be 2 m belowuser's feet.Use with connection through energyabsorber ref. 1029.01 is authorized.Additional tests by C.A.M.P. R&D Dept. with massesup to 120 kg were successful.Minimum clearance distance must be 3.2 m belowuser's feet.Use with connection through connectorref. 981 is authorized.Additional tests by C.A.M.P. R&D Dept. with massesup to 150 kg were successful.Minimum clearance distance must be 2 m belowuser's feet.Use with connection through energyabsorber ref. 1029.01 is NOT authorized.Additional tests by C.A.M.P. R&D Dept. with massesheavier than 120 kg were not successful.1390 Rope Fall Arrester.Cable FallArrester Kitref.1317.01EN353-2EN353-2 standard doesnot prescribe any weightlimit for the user.Use is authorized.Additional tests by C.A.M.P. R&D Dept. with massesup to 150 kg were successful.Minimum clearance distance must be 2.7 m belowuser's feet.Never use the fall arrester alone, without the energyabsorber ref. 1029.01.1317.01 Cable Fall Arrester Kit.Tripod EvoEN795/BEN795/B standard doesnot prescribe any weightlimit for the user.Use is authorized.Safety depends on the devices used in combinationwith the tripod: check that the devices are suitablefor this weight.1883 Tripod Evo.RescueLifting DeviceEN1496EN1496 standardprescribes that dynamictests are made withthe maximum weightdeclared by themanufacturer.Use is authorized.Certification was carried out for a weight limitof 140 kg.Use is authorized up to 140 kg.Certification was carried out for a weight limitof 140 kg.284 Rescue Lifting Device 20 m,284.01 Rescue Lifting Device 25 m.PulleysEN12278EN12278 standardprescribes that rotationmust be guaranteed forweight of 2 kN (200 kgapprox.).Use is authorized.Declared working load limit is higherthan 200 kg.1229 Small Pulley Fixed, 606 Roller Fixed,1099 Small Pulley Mobile, 607 Roller,1098 Big Pulley Mobile, 641 Big Roller,1097 Big Double Pulley, 651 Double Roller,1638 Flyte, 1049 Wing, 108 Andry.Low Stretch RopesEN1891EN1891 standard doesnot prescribe any weightlimit for the user.Use is authorized.Safety depends on the devices used in combinationwith the rope: check that the system is suitable forthis weight.1755 Titanium 9 mm, 1756 Titanium 10 mm,1757 Titanium 10.5 mm,1761 Nickel 10.5 mm, 1754 Silver 10.5 mm,1758/.01/.02/1759 Titanium 11 mm,1900 Titanium 11 mm with end loops,1760 Chrome 12.5 mm.Rescue TrianglesEN1498EN1498 standardprescribes that dynamictests are made withthe maximum weightdeclared by themanufacturer.Use is authorized.Certification was carried out for a weight limitof 100 kg.Additional tests by C.A.M.P. R&D Dept. with massesup to 150 kg were successful.2050 Angel, 967.01 Triangolo Special.15

Construction of a new bridge on the river Rudavoi.Cortina d’Ampezzo, Italy (© Sergio Albanello, Dolomiti Vertical Service)is a brand owned byVia Roma, 2323834 Premana (LC)ITALYTel. +39 0341 890117Fax +39 0341 818010www.camp.itcontact@camp.itSHOW ROOMVia Piedimonte, 62a23868 Valmadrera (LC)ITALYFrancefrance sarl1800, Avenue André Lasquin74700 SallanchesTel. 04 50937405Fax 04 50937392contact@campfrance.frTechnical specifications may change without notice.It is your own responsibility to study and learn how to use properly this equipment.The content of this catalogue can’t be used without font referencesand without written authorisation of C.A.M.P. Spa.© C.A.M.P. Spa - All rights reserved - Printed in Italy - April 2012Photo credits: Sergio Albanello, Dolomiti Vertical Service - Pros en ImageProduct photos: Mario SpreaficoGraphic project: PrePrint - LeccoC.A.M.P. prints their catalogues using the GreenPrinting ® philosophyto protect the environment through the useof green materials and renewable energy.