Quick Start - Nexcesscdn.net
Quick Start - Nexcesscdn.net
Quick Start - Nexcesscdn.net
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
MAIN MENU > OPTIONS > RECOVERY Range: FAST, DEEP<br />
Factory Presets: FAST=OFF, DEEP=OFF<br />
54 RECOVERY -<br />
Enhancing Explorer SE Performance<br />
CONTRAST<br />
55<br />
RECOVERY allows you to select the<br />
way the discrimination process works.<br />
RECOVERY settings affect both the<br />
detector’s audio and display response to<br />
target characteristics.<br />
FAST<br />
By selecting this setting, the detector<br />
will react faster to the signals received,<br />
but the discrimination and target ID<br />
may be slightly less accurate. Use FAST<br />
in areas littered with objects, where a<br />
desired target could be hiding next to<br />
unwanted objects.<br />
DEEP<br />
This setting affects only weak target<br />
signals and enhances them to allow<br />
identification of deep targets. This<br />
setting should be selected in relatively<br />
uncluttered areas where deep targets<br />
are anticipated. Strong signals are<br />
unaffected.<br />
Best compromise<br />
of depth, audio<br />
response,<br />
Target ID and<br />
discrimination for<br />
normal detecting<br />
conditions.<br />
Better audio<br />
response in<br />
‘trashy’ areas<br />
at the expense<br />
of target ID and<br />
discrimination<br />
accuracy.<br />
In the DEEP setting there will be a<br />
slightly slower reaction in target signal<br />
and target ID due to the more detailed<br />
processing of the target characteristics.<br />
To select a RECOVERY setting:<br />
1. Press the shift button next to the<br />
desired RECOVERY setting.<br />
2. Press DETECT to return to Smartfind/<br />
Digital and continue detecting.<br />
Improved audio<br />
response for<br />
weak signals,<br />
in less cluttered<br />
environments.<br />
Less accurate<br />
discrimination and<br />
Target ID; amplified<br />
signals for small<br />
targets, response<br />
time is similar<br />
to DEEP=OFF,<br />
FAST=OFF.<br />
MAIN MENU > OPTIONS > CONTRAST<br />
The LCD may be hard to see in bright<br />
or overcast conditions.<br />
To adjust LCD Contrast:<br />
Press the shift buttons next to the<br />
arrows of the slider control to adjust<br />
the contrast of the LCD.<br />
Press DETECT to return to Smartfind<br />
and continue detecting.<br />
Range: 1 to 10<br />
Factory Presets: 5