Download the NHP Fibox Enclosure Customising Brochure

Wall fixing holes are provided forbrackets or mounting direct on to thewall, allowing airflow around the back.Strengthened overfolded frontframe serves as a gutter tokeep liquids away from thegasket.Wall mount enclosuresMild steel - MAS (single door)Protection class IP 66Concealed hinges, providing 130 °opening and clean smooth lines.Captive hinge pins.Door opens withinits own body widthEarthing points on body anddoor with fixings supplied forthe mounting plate.Cable fixing holespositioned in the top andbottom of the mounting plate.Customised lockfitted with 3 mmdouble bit lock. Otherlock options available.Technical dataMaterial:Body: Steel plate 1.2 mm/1.4 mm(MAS0606021R5 and above)1.5 mm (MAS1008026R5 and above)Door: Steel plate 1.2 mm/1.4 mm(MAS0605021R5 and above),1.8 mm (MAS1006030R5 and above).Mounting plate: 2 mm galvanised steel.Gland plate positioned to the rear of cabinetand aperture is equal to width of mounting plateMountingplate:The plate is marked at 10 mm intervals foreasy horizontal positioning of equipment onthe mounting plate. On the top and bottomare holes to facilitate cable fixing. Fixed ontoM8 press welded studs to the rear of theenclosure. All sizes from 800 mm and aboveare strengthened by folded edges.Body:Folded and seam welded. Four wall fixing holesare pressed out 2 mm, which protects the backfrom damage while laying on its back and toallow airflow around the rear.Gland plateopenings:Situated at the far rear of the enclosure toaccommodate easy cabling onto the mountingplate. Flush mounted. Five different widthsand two depths depending on enclosure size.Door:Lock:Surface mounted with 130 º opening.Concealed removable hinge with captive pincan be mounted to allow left or right handopening. From size MAS0604015R5 and largerthere are two removable mounting profiles inthe door. Sealing is ensured by an extrudedone piece polyurethane gasket.Customised lock with double grip for easyopening of the door, DIN-lock with 3 mm pinand 90 º movement. 1000 and 1200 mm highenclosures have three point locking.Other inserts are available.Finish: Body, door and gland plates: RAL 7035polyester powder structure paint.Protection: Corresponds with IP 66 and NEMA 4, 12 and 13.IK 10Delivery Two door mounting profiles (size MAS0604015R5includes: and larger). Mounting plate and gland plate(s)with gasket(s).Approved by the following institutes:For further information please contact Sales 0800 NHP NHP or visit nhp-nz.comGST not included33