Download the NHP Fibox Enclosure Customising Brochure

Floor standing enclosuresMild steel - MPGSurface mounted doorsand panels with extrudedone piece gaskets.Protection class IP 66/55Screw fixed removabledoor panel.Integral handleto aid lifting.The 2 point locking for singledoors and 3 point locking fordouble doors increases sealingand rigidity.Locking points and hinges arefront mounted outside theaperture to simplify rehinging ofthe door even if the enclosure isfully equipped. Enabling right orleft hand opening.Bottom gland platesfitted as standard.Technical dataMaterial: Body: Mild steel plate 1.5 mm.Mounting plate: 2.5 mm galvanised steel.Bottom plates: 1.5 mm galvanised steel.Body: Folded and seam welded. Integrated plinth.Rear Single folded surface mounted. Screw fixed.panel:EarthingPoints:Finish:Protection:M8 threaded studs on body, door,top panel and rear panel.Grey RAL 7035 powder structure paint.Single door: Corresponds with IP 66 andNEMA 4,12 and 13. Double door: Correspondswith IP 55 and NEMA 12 and 13.Roofpanel:Single folded surface mounted. Angle 15 ° fromhorizontal. Concealed hinges on top edge allow80 ° opening. Panel held open by self engage/self release mechanical panel stay.Deliveryincludes:Mounting plate and suitable nuts and washersfor the various earthing studs. The console isdelivered on a wooden pallet.Locks:DIN-locks with 3 mm pin for top panel,2 point locking for single front door and3 point for double front door.Approved by the following institutes:Cableinlet:Bottom opening for cable access. Bottomplate for cable glanding supplied as standard.Frontdoor:Single folded surface mounted with hingesallowing left or right hand opening.60 For further information please contact Sales 0800 NHP NHP or visit nhp-nz.com GST not included