Download the NHP Fibox Enclosure Customising Brochure

Floor standing enclosuresMild steel - MCMCustomised designstrip in browncontrastProtection class IP 44Optional 19” profilesCIPP can be fittedfor 19” mountedmonitors or PC’sSurface mountedpanels with extrudedone piece gasketsSmoked safety glassSide panels suppliedas standardGlazed door for 14”to 21” monitorsMonitor shelf fittedwith RAS (RapidAdjustment System)Optional shelves forPC and printerSliding mouse pad(LH or RH)Door for access tocomputer and printerTechnical dataMaterial:Frame:Frame: 1.5 mm painted steel. Front and reardoors: 2.0 mm painted steel. Roof and sidepanels: 1.35 mm painted steel. Bottom plates:1 mm galvanised steel.Seam-welded reversed open profiles with 25 mmintergrated external hole pattern.Monitor shelf: Fully adjustable in height with newly developedRAS (Rapid Adjustment System).Lock:Earthing:Two or four point locking system. Does notinterfere with the enclosure inner space.Standard DIN-lock with 3 mm pin. Can beexchanged for standard inserts or Euro-cylinderor swing handle. Monitor door and keyboard trayare fitted with key lock.All panels are earthed through their fittings andare equipped with a separate earthing stud.Front door:Surface mounted with concealed hinges.Monitor door: Fitted with design strip in brown (RAL 7015)which allows customisation. Viewing area375 x 455 mm for monitor 14 ”-21 ”.Keyboard tray: Hinged, with mouse pad (RH or LH). Painted ina two tone colour grey/brown. Max keyboardwidth 470 mm.Rear door:Side panels:Roof panel:Surface mounted with hinges allowing left orright hand opening.Removable, fixed on the outside hole pattern ofthe frame for easy and rapid mounting. Accessto the fixing screws is denied when the doorsare closed.Removable and fixed from the inside.Finish: Grey RAL 7035 polyester powder structure paintin combination with brown RAL 7015.Protection: Corresponds with max. IP 44, NEMA 12 and IK 10.Delivery Frame with fitted plain and glazed doors,includes: hinged keyboard tray, mouse pad, monitor shelf,roof panel, bottom plates, side panels and fixingdevices. Delivery also includes earthing bolts.Delivered on a pallet with width identical withthe enclosure to allow suiting without removal.All packing material is recyclable.Approved by the following institutes:Bottom plates: Consists of three pieces for 600 mm deep andfour pieces for 800 mm deep.62 For further information please contact Sales 0800 NHP NHP or visit nhp-nz.com GST not included