Download the NHP Fibox Enclosure Customising Brochure

Floor standing enclosuresMild steel - MCS (single door)Protection class IP 56Technical dataMaterial:Frame: 1.5/ 1.75 mm painted steel.Door: 2.0 mm painted steel.Rear, roof and side panels: 1.35 mm paintedsteel.Mounting plate: 2.7 mm galvanised steel.Bottom plates: 1 mm galvanised steel.Finish: Structure powder paint RAL 7035.Mounting plate:Double folded and slides into position.Adjustable in depth by steps of 25 mm.Attached on the outside of the enclosurecarton.Frame:Seamwelded reversed open profiles with25 mm hole pattern according to DIN 43660.Including integrated external hole pattern.Earthing:All panels are earthed through their fittingsand are equipped with a separate earthingstud.Door:Rear panel:Side panels:Roof panel:Lock:Surface mounted with hinges allowing left orright hand opening. Including door frame with25 mm hole pattern.Fitted by M6 torx screws. Standard facilitiesfor rear door mounting.Supplied as an accessory.Removable.4-point locking system. Does not interferewith the enclosure inner space. StandardDIN-lock with 3 mm pin. Can be exchanged forstandard inserts or Euro-cylinder, swing handleor digital locking system.Protection: Corresponds with IP 56 and Nema 12 and 13,IK 10.Delivery:Frame with fitted door, rear panel, roof panel,bottom plate, mounting plate 1 ) and doorframe. Delivery also includes earthing bolts.Delivered on a pallet which is the same widthas the cabinet. Ideal when baying orcombining cabinets. All packing materialrecyclable. In 400 mm wide enclosuresamounting plate, bottom plates and doorframe is not standard.Approved by the following institutes:Note: 1) Not included in 400 mm wide cabling enclosures.54 For further information please contact Sales 0800 NHP NHP or visit nhp-nz.com GST not included