Download the NHP Fibox Enclosure Customising Brochure

Floor standing enclosuresMild steel - MCD (double door)Protection class IP 55Technical dataMaterial:Frame:Door:Rear panel:Side panels:Roof panel:Lock:Frame: 1.5/ 1.75 mm painted steel.Doors: 2.0 mm painted steel.Rear, roof and side panels: 1.35 mm paintedsteel.Mounting plate: 2.7 mmgalvanised steel.Bottom plates: 1 mm galvanised steel.Seamwelded reversed open profiles with25 mm hole pattern according to DIN 43660.Including integrated external hole pattern.Surface mounted with four hinges. Includingdoor frame with 25 mm hole pattern. Doorscannot be reversed. Separate doors to beordered for left hand door locking.Fitted by M6 torx screws. Standard facilitiesfor rear door mounting. Split rear panels in1600 wide enclosures.Supplied as an accessory.Removable.4-point locking system. Does not interferewith the enclosure inner space. StandardDIN-lock with 3 mm pin. Can be exchanged forstandard inserts or Euro-cylinder, swing handleor digital locking system.Mounting plate:Earthing:Double folded and adjustable in depth bysteps of 25 mm. Delivered attached to theoutside of the enclosure carton. 1600 mmwide mounting plate fitted inside.All panels are earthed through their fittingsand are equipped with a separate earthingstud.Finish: Structure powder paint RAL 7035Protection: Corresponds with IP 55 and Nema 12 and 13,IK 10Delivery:Frame with fitted doors, rear panel, roofpanel, bottom plates, mounting plate anddoor frame. Delivery also includes earthingbolts. Delivered on a pallet which is the sameas the cabinet width. All packing materialrecyclable.Approved by the following institutes:For further information please contact Sales 0800 NHP NHP or visit nhp-nz.comGST not included57