User Manual - PLUS Corporation of America

General OperationUsing the Presentation TimerThe presentation is given while checking the timer displayedon the screen.The gauge display allows the remaining time to be known ata glance.(1) Press the TIMER button to show the settings display.The display will close when an operation has not been madefor about 10 seconds.(2)CANCEL button(3)STANDBYMENURGBENTERVIDEO CANCELQUICKQFREEZE MUTE ECO AUTO1 2 3 4ASPECTVOL KSTN ZOOMTIMER(1)[Timer settings display]Press the CANCEL button to close the display immediately.(2) Use the and SELECT buttons to set the time.The setting contents are “Off” and from 10 to 60 minutes (in10-minute intervals)Settings can also be made with the SELECT () buttons.(3) Press the ENTER button and start the timer.• The display of the timer setting will close, the display of thetimer will appear and simultaneously the timer will start.[Timer Display]Gauge (Blue)The blue gauge indicates the remaining time. When thegauge disappears,the time is up.The gauge continues to be displayed when the timer isstopped.When the remaining time is“0” (Gray)• Press the ENTER button to restart the timer. The timer willstart with the same time setting.• Press the CANCEL button to close the timer display. Thetimer setting will return to “Off”.Moving the Position of the Timer DisplayThe SELECT () buttons on the remote control permit movementwithin the movable range of the timer display.Movable Range of the Timer DisplayNote:* The timer display will be closed while the menu or the quick menu is displayed, and while a message is displayed; however, the timer willstill be operating at such times. Also, the timer will not be displayed unless a signal is being input.* While the presentation timer is being displayed, screen movement will not be possible in the zoom mode.E-29