Pneumatic Tools - Pneumat System

Stapler, Brad NailerPruning Shear3High quality stapler for staples with size 12.7 mm (type 80) and bigmagazine for 160 staples. With safety trigger, insulated handle and swivellingexhaust port (360°) for high comfort. Well suited for upholstery work,furni-ture and wooden box manufacturers.Possible staple lengths (A): 6-16 mm.for 160 staplesType 80short nose 20 mmModel Article no.RC5900 8951076006Every stapler and nailermentioned here comes in a toolbox.3Combination nailer and stapler (1 mm wire) with big magazine for 100 nails or 100 staples alternatively. Multipleshot- see image below - for fast series of shots by simply touching the workpiece with the activator at the nose tip(bounce fire) - can be switched off for single shot operations. With insulated handle and swivelling exhaust port forhigh comfort. Well suited for upholstery work, furniture and wooden box manufacturers.Possible staples lengths (A): 16-38 mm,possible nails lengths (A): 15-40 mm.Model Article no. brads (18 Gauge) staples (18 Gauge)RC5940 8951076007combinationfor 100 nailsor 100 staples alternativelyModelFastenerswidth (height)Load capacityWeightInner hosediameterDimensiona x b x c x dAir consumptionAir inletDuty levelNoiseLpAVibration[mm][pcs][kg][mm]K 12,7 (6 – 16)RC5900 K 160 0.8 8 189x148x20x208 0.8 1/4” IG 3 81.3 4.01Typ 80 / 21 JaugeK 5,8(16-38) K 100RC59402.1 8 217x246x27x225 1.3 1/4” IG 3 85.9 3.92J 1(15-40) 18 Jauge J 100max. pressure 6.3 bar (90 psi) K: staples J: brads IG: female threadnorms applied : noise according to noise according to ISO15744, vibration 3-axis according to ISO28927-1, more detailed specs see page 69[mm][l/stroke][inch][dB(A)][m/s²]for wood,twigs and also plasticsPruning shear for max. diameter 15 mm. Cuts wine, wood, plastics and othersoft materials, profiles, rods. With safety latch against accidental cutting andwith knuckle protector.2pruning shearModel Article no.RC6220 8951076010ModelCutting speedCuttingcapacityCuttingwidthWeightInner hosediameterDimensiona x b x cAir consumptionaverageAir inletDutylevelNoiseLpAVibration24[m/min][mm] [mm] [kg] [mm] [mm][l/min] [inch][dB(A)] [m/s²]RC6220 -- -- -- 0.65 8 258x116x120 0.5l/cut 1/4” IG 2 65.2 2.97max. pressure 6.3 bar (90 psi) IG: female threadnorms applied : noise according to noise according to ISO15744, vibration 3-axis according to ISO28927-1, more detailed specs see page 69