Pneumatic Tools - Pneumat System

Sand Blasterswww.rodcraft.comfor small areasclean with vacuumand collection bag1Small sand blaster with recovery of the blasting material throughself-induced suction and collection bag. With 5 different sorts of nozzlesfor concave and convex corners, brush nozzle, spot blasting nozzle andnozzle for sand blasting of larger surfaces in stripes. Includes a bottle of0,8 kg copper slag blasting material.sand blasting setmodel article no.RC8113 8951070023portable with 10 lblasting material container1Sand blaster for mobile use - just with compressed air - for workingon suspension parts, rims, car bodies and many other applications.With portable blasting material container (10 l) and long hose (5 m)for connection of container and gun. Important: The blasting materialhas have particle sizes 0,4 – 0,8 mm and it should be dry withoutclogs. Note that the small hole on the fitting at the tank is alwayskept open for an optimum air suction flow. Accessory available(except blasting material). Do not work without personal protection(goggles, dust hood etc.)sand blasterceramic nozzle (5 piece set)gun, completedust maskmodel article no.RC8112 8951070003895101168989510116908951011681ModelSize of ParticleBlastingMaterialCapacityapprox.VMax.PressionWeightInner HoseDiameterDimensiona x b x cAir Consumptionaverage – continuousDuty Level Nozzle Air Inlet[mm] [mm] [Rpm] [kg] [mm] [mm] [l/min] [mm] [inch]RC8112 0.4 - 0.8 10.0 6.7 2.35 8 157x150x250x500 170 240 1 5 1/4” AGRC8113 0.4 - 0.8 1.0 6-8 0.90 8 255x223 190 330 1 6 (65) 1/4” AGHVLP: high volume – low pressure (pressure on air inlet can be regulated precisely, low side fog and economic paint consumption)AG = male thread norms applied : noise according to ISO15744, more detailed specs see page 69.IG = female thread49