Pneumatic Tools - Pneumat System

Polisherswith regulatorcompositePolishing SystemsThe complete range of polishingaccessory can be found on page 61DUS 35For Smart repairs – paint repairs limited to a small area,saving time and consumables. Lightweight and handytool with composite housing. Speed regulator with thumbknob for one hand operation. Air exhaust down motorhousing.75 mm – velcro - 5/16“disc + sponge8951011560 + 8951011555modelarticle no.RC7683K 8951000017Set 7683K consists of air tool and:1 pc. 75 mm (3”) velcro pad1 pc. polishing sponge white 75 mm (3”)1 pc. polishing sponge yellow 75 mm (3”)1 pc. polishing wool pad 75 mm (3”)article no.8951011606disc + felt8951011560 + 8951011556150 mm – velcro – 5/8disc + sponge8951011554 + 8951011587disc+ lamb wool(rounded) (velcro)8951011554 + 8951011586flat head ergonomically optimisedfor confined areas for accessoryup to 178 (7") mm3150-170 mm – to tie - 5/8“disc /sponge160 mm8951011551Large angle polisher with special low head design, available with thread type 5/8“ and M14x2. Equipped withan insulating handle cover for continous polishing and rear exhaust to guide away cold exhausted air.The variant with 5/8“ thread includes a high quality polishing pad with completely rounded rim and a lamb woolbonnet with straps to tie.angle polisher 178 (7") mm – 5/8“angle polisher 178 (7") mm – M14x2polishing pad 170 mm – 5/8“ (round rim)lamb wool bonnet with strapsFor more polishing accessory range see box on rightmodel article no..RC7130 8951072004RC7131 895107201489510115498951011550170 mmdisclamb wool(rounded) + (to tie)8951011549 + 8951011550150 mmdisclamb wool(super soft) + (to tie)8951011552 + 8951011550ModelDrivePowerSpeedorbitalWeightInner HoseDiameterDimensiona x b x cAir Consumptionaverage – continuousAir Inlet NoiseLpAVibration42RC7130 5/8” AG 178 500 2500 2.0 8 320x38x100 525 700 1/4” IG 87.9 6.9RC7131 M14 x 2 AG 178 500 2500 2.0 8 320x38x100 525 700 1/4” IG 80.8 2.7RC7683KSpindle Disc [mm] [W] [rpm] [kg] [mm] [mm] [l/min] [Inch] [dB(A)] [m/s²]5/16”-24UNF IG75 V (3”) 150 5500 0.6 8 125x125x42 360 480 1/4” IG 78.5 3.8max. pressure 6.3 bar (90 psi) V: velcro sanding pad IG: female thread AG: male threadnorms applied : noise according to ISO15744, vibration 3-axis according to ISO28927-3, more detailed specs see page 69.