Pneumatic Tools - Pneumat System

Maintenance Units, Water Separators,Filters, Regulators, Lubricators, Lubricantsmaintenance units (5 micron)Delivers clean, dry and lubricated air at constant pressure for air tools and other compressed air activators:water separator with automatic drain, filter element with 5 micron, micro-fog lubricator with flow sensor for almost constantoil/air ratio for several air tools in use, oil sight dome allows 360° visibility as well as simple adjustment and installation,metal bowls with bajonet quick release and prismatic full level sight windows for high inlet pressure and increased safety,fastelement clamping system allows front access and individual removal of elements, wall fixation bracket2 piece slim version : water separator – filter – regulator and gauge + lubricator3 piece low height version : water separator – filter + regulator and gauge + lubricatorpressure gauge: diameter 40 mm, 0-10 bar / 90 psi for FRL units 1/4" - article no. 8940169178,diameter 50 mm, 0-10 bar / 90 psi for FRL units 1/2" - article no. 8940169180thread(inch)pressure(IN / OUT)(bar)max. airflow rate(l/min)oilcapacity(ml)constructiondimensionaxbxc(mm)modelarticle no.1/4” G 10 / 0 - 10 2220 1002 piece3 piece220x107x100 MN2-14 8940168574220x165x100 MN3-14 8940168575cba1/2” G 17 / 0 - 10 3000 2002 piece3 piece255x150x125 MD2-12 8940168576255x232x125 MD3-12 8940168577operating temperatures -20°C* – 65°C (**-34°C* – 80°C)* air supply must be dry enough to avoid ice formation at temperatures below 2 °Cspray painting unit (0,01 micron)aDelivers extremely clean and oil-free, dry air at constant pressure for spray guns and other oil-free running air tools :water separator with automatic drain, filter element with 5 micron, high efficiency oil and particle removal filter element with0,01 micron (oil removal class level 2 – 0,01 mg/m³) and filter service indicator shows red when filter needs replacement, airdistribution block with 2 outlets and air valves, metal bowls with bajonet quick release and prismatic full level sightwindows for high inlet pressure and increased safety, fast element clamping system allows front access and individualremoval of elements, wall fixation bracket water separator – filter – regulator and gauge + coalescing filter + distributionblock + air valvescbthread pressure max. air oil dimension(IN / OUT) flow rate capacity axbxcmodelarticle no.(inch) (bar) (l/min) (ml) (mm)1/2” IG 17 / 0 - 10 3000 200 174 - 160 MD2LAK-12 8940168482operating temperatures -20°C* – 65°C * air supply must be dry enough to avoid ice formation at temperatures below 2 °Cpower regulator °(reduces power and speed).inline lubricator °(for mobile use e.g. on construction sites)characteristics(in-out)modelarticle no.1/4” IG – 1/4” AG AR 1 89510118581/4” IG – 1/4” AG DG 1 R 8951011860G1KG1Gcharacteristics(in-out)model1/4” IG - 1/4” AG (4 ml*) G 1 K 89510118511/4” IG - 1/4” IG (28 ml*) G 1 G 8951011852**3/8” IG - 3/8” IG (28 ml*) G 2 8951011853**1/2” AG - 1/2” AG (28 ml*) G 3 8951011854**1/4” IG - 1/4” AG (12 ml*) G 1 M 8951011856* oil capacity ** adjustablearticle no.swivel air joint ° (for best operatability in confined areas) inline filtre °1/4” IG – 1/4” AG DG 1 89510118591/4” FT – 1/4” AG F 1 G 89510118551/4” IG – 1/4” AG DG 1 R 8951011860° for connection into tool air inlet IG: female threadAG: male threadLubricants for air toolsspecial air lubricant(contains silicone)impact system oil(for pin-clutch type)model1000 L, 1 litre air lubrication oil in bottle with nozzle1000 S, 1 litre impact system oil in bottle with nozzlearticle no.8951011861895101186265