Pneumatic Tools - Pneumat System

Mini Die Grinder20000 - 55000 rpmDUS 30rear exhaust55000 rpm. 3 mm2High-speed precision grinder -pencil style - for engravingsor tuning work. Includescollet 3 mm. The supplied silencing exhausthose system guides air flow away from theuse.Carborundum Grinding PointsSets with 5 different shapes: ball, cone, bulletand long and short cylinder. Available with 3 and6 mm collet shafts.Set Model Article no.5 x 3 mm K03 89510115735 x 6 mm K06 8951011574mini die grinder 3 mmcollet 3 mmModel Article no.RC7050RE 8951075190SPZE3 8951011483DUS 24rear exhaust25000 rpm. 6 mm (3 mm)2Mini die grinder with 6 mm collet (3 mm colletalso available).With rear exhaust in order to attacha silencing exhaust hose system. Long designavailable for two hand use and difficult to reachspots.die grinder shortdie grinder longcollet 6 mmcollet 3 mmModel Article no.RC7010 8951075040RC7045 8951075120SPZA6 8951011480SPZA3 8951011460DUS 23rear exhaust26000 rpm. 6 mm (3 mm)2Small die grinder with insulated handle and6 mm collet (3 mm collet also available). With integrated rear exhaust andadapter ring to attach a silencing exhaust hose system (DUS 23).Set RC7012 consists of:1 die grinder 6 mm5 grinding points with 6 mm shaft5 grinding points with 3 mm shaft1 collet 3 mm2 key for exchange of accessories1 tool boxRC7011895101157489510115738951011460die grinder 6 mmsetcollet 6 mmcollet 3 mmModel Article no.RC7011 8951075050RC7012 8951175000SPZA6 8951011480SPZA3 8951011460silencing exhaust hose systems see page 67Model Collet PowerSpeed Weight Inner HoseDiameterDimensiona x b x cAir Consumptionaverage – continuousAir Inlet Duty Level NoiseLpAVibration[mm] [W][rpm] [kg] [mm] [mm] [l/min] [inch] [dB(A)] [m/s²]RC7050RE 3 150 55000 0.2 8 134x15 140 180 1/4” IG 2 75.2 2.6RC7010 6 280 25000 0.4 8 154x40x20 320 390 1/4” IG 2 82.4 3.6RC7011 6 300 26000 0.4 8 155x38x19 340 415 1/4” IG 2 82.7 9.54RC7045 6 300 23000 0.55 8 233x34x20 330 400 1/4” IG 2 83.9 3.332 max. pressure 6.3 bar (90 psi) FT: female threadnorms applied : noise according to ISO15744, vibration 3-axis according to ISO20643, more detailed specs see page 69.