Pneumatic Tools - Pneumat System

Pistol and Angle Sanderswww.rodcraft.comAccessory for Pistol SandersBacking pads in various hardnesses,adapter for use of standard 5/8”accessory and adapter for drillchuck thread size 3/8”-24.Please see alsopage 613for flexible fibre discs up to115 mmadjustable speedFast pistol sanders with adjustable speed (and power) for fibre discs.For safety reasons this tool cannot be used with hard cutting andgrinding discs, please see our models 7160 - 7166 with speedgovernor.pistol sanderprotective guard for 7150backing pad 80 x 22 mmbacking pad 115 x 22 mmbacking pad 140 x 22 mmadapter with M14 x 2 AGModel Article no.RC7150 89510720217150-S 8951011538316-2 8951011544416-2 8951011545516-2 8951011548A7150 8951011449Sanding with Angle GrindersAngle sanders can be used withbacking pads, fibre discs and flapdiscs as well as brushes.Diameters of backing pads that fit ourRODCRAFT angle tools:for flexible fibre discs up to 178 (7”) mmcold-insulated with rear exhaust3Model 7166 (M14x2)Model 7120 (5/8”)Model 7121 (M14x2)Model 7181 (M14x2)Model 7183 (5/8”)Please see alsopage 40/41115 mm125 mm178 mm178 mm178 mm178 mmErgonomically optimised angle grinder with cold-insulated handle, silencer and rear exhaust. Ideallysuited for sanding of metal surfaces and stripping of paint or other coatings.With easy maintenance grease plug for fast regreasing of the angle gear. Additional side handle canbe mounted on both sides to serve also left handed persons.Two type of thread available:model 7120 with 5/8” thread and backing pad,model 7121 with M14x2 thread for standard M14 accessoryPractical accessory that can beattached quicklyFor spot repairs, sanding, rustremoval, stripping paint.Please see also page 60angle sander with 5/8” backing pad (178 (7”) mm)angle sander with M14x2 thread (without accessory)backing pads for flexible fibre discs 178 (7”) mm - 5/8” IGlock nut for backing pad 5/8” IGtwo-hole key for lock nutbacking pad, velcro 150 (6”) mm – 5/8” IGbacking pad, velcro 150 (6”)mm – M14X2 IGModel Article no.RC7120 8951072001RC7121 8951072011716-2 895101154689502506058950290097KT150 8951011554KT150M14 8951011605Please order lock nut and zwo-hole spanner along with any order of the backing pad.ModelDrivePower Speed Weight Inner HoseDiameterDimensiona x b x c x dAir Consumptionaverage – continuousAir InletNoiseLpAVibrationTige Disque [mm] [W] [Rpm] [kg] [mm] [mm] [l/min] [inch] [dB(A)] [m/s²]RC7120 5/8” AG 178 500 4500 2.0 8 320x38x100 525 700 1/4” IG 91.4 2.7RC7121 M14 x 2 AG 178 500 4500 2.0 8 320x38x100 525 700 1/4” IG 81 2.7RC7150 7/16”- 20 AG75x22105x22 400 18000 1.15 8 152x157x38 410 570 1/4” IG 81 3.2115x221/4”- 20UNF 50RC7681K (2”)AG 75 V (3”)150 15000 0.4 8 120x125x42 365 490 1/4” IG 74.6 5.9max. pressure 6.3 bar (90 psi) V: velcro IG: female thread AG: male threadnorms applied : noise according to ISO15744, vibration 3-axis according to ISO28927-3, more detailed specs see page 69.39