Chromaflo MSDS888-1810 - Yellow Oxide C - Dryvit

MATERIAL SAFETY DATA SHEET888-1810 COLORTREND®YELLOW OXIDE CMaterial no.Specification 139622Order NumberVersion2.0 / USRevision date 12/14/2011Print Date 07/13/2012Page 4 / 11Methods for cleaning upVentilate area. Absorb spill with inert material and place in a chemical waste container.7. HANDLING AND STORAGEHandlingSafe handling adviceAvoid contact with eyes, skin and clothing. Use with adequate ventilation. Avoid breathing vapor or mist.Follow all MSDS/label precautions even after container is emptied because it may retain productresidues. Wash thoroughly after handling.StorageRequirements for storage areas and containersKeep in a dry, cool place.Keep container closed when not in use.Residual vapors might explode on ignition; do not apply heat, cut, drill, grind or weld on or near thiscontainer.8. EXPOSURE CONTROLS / PERSONAL PROTECTIONComponent occupational exposure guidelines• ethanediol; ethylene glycolCAS-No. 107-21-1Control parameters 100 mg/m3 Ceiling Limit Value:(ACGIH)Aerosol.40 ppm100 mg/m3Vapor.Ceiling Limit Value:(US CA OEL)• Titanium dioxideCAS-No. 13463-67-710 mg/m3 Time Weighted Average (TWA):(ACGIH)15 mg/m3 PEL:(OSHA Z1)Total dust.• Distillates (petroleum), solvent-refined heavy paraffinic; Baseoil - unspecifiedCAS-No. 64741-88-4400 ppm1600 mg/m3Listed.500 ppmPEL:(OSHA Z1)2000 mg/m35 mg/m3 PEL:(OSHA Z1)Mist.Time Weighted Average (TWA)Permissible Exposure Limit (PEL):(US CAOEL)(US CA OEL)MSDS-US (R11/011) / 12/14/2011 5:51