Chromaflo MSDS888-1810 - Yellow Oxide C - Dryvit

MATERIAL SAFETY DATA SHEET888-1810 COLORTREND®YELLOW OXIDE CMaterial no.Specification 139622Order NumberPersonal protective equipmentVersion2.0 / USRevision date 12/14/2011Print Date 07/13/2012Page 6 / 11Respiratory protectionA respiratory protection program that meets OSHA 1910.134 and ANSI Z88.2 or applicablefederal/provincial requirements must be followed whenever workplace conditions warrant respirator use.NIOSH's "Respirator Decision Logic" may be useful in determining the suitability of various types ofrespirators.Hand protectionUse impermeable gloves.Eye protectionChemical resistant goggles must be worn.Skin and body protectionA safety shower and eye wash fountain should be readily available.To identify additional Personal Protective Equipment (PPE) requirements, it is recommended that ahazard assessment in accordance with the OSHA PPE Standard (29CFR1910.132) be conducted beforeusing this product.9. PHYSICAL AND CHEMICAL PROPERTIESAppearanceFormpasteColoryellowOdorGlycol odor.Safety datapH 8.0 - 9.0Boiling point/range > 100 °CFlash pointAutoignition temperature:Lower explosion limitUpper explosion limitnot determinednot determinednot determinednot determinedRelative density 1.8Solubility/qualitativeViscosity, dynamicRelative vapor densityEvaporation rateSolubility in water: Dispersible.70 - 90 KU (25 °C)Heavier than airSlower than butyl acetate10. STABILITY AND REACTIVITYMSDS-US (R11/011) / 12/14/2011 5:51