EU-SICHERHEITSDATENBLATT CLO (Claryfied Oil) ABSCHNITT 1 ...

Heavy Fuel Oil Components9.1. Manufacture of Heavy Fuel Oil – Industrial9.1.1. Exposure ScenarioSection 1 Exposure Scenario Title Heavy Fuel OilTitleManufacture of SubstanceUse DescriptorSector(s) of Use 3, 8, 9Process Categories 1, 2, 3, 8a, 8b, 15Further information on the mapping and allocation ofPROC codes is contained in Table 9.1Environmental Release Categories 1, 4Specific Environmental Release Category ESVOC SpERC 1.1.v1Processes, tasks, activities coveredManufacture of the substance or use as a process chemical or extraction agent within closed orcontained systems. Includes incidental exposures during recycling/ recovery, material transfers,storage, sampling, associated laboratory activities, maintenance and loading (including marinevessel/barge, road/rail car and bulk container).Assessment MethodSee Section 3.Section 2 Operational conditions and risk management measuresSection 2.1 Control of worker exposureProduct characteristicsPhysical form of product Liquid, vapour pressure 20°C above ambientConditions affecting temperature). OC7. Assumes a good basic standard of occupationalexposurehygiene is implemented G1.Contributing Scenarios Specific Risk Management Measures and Operating ConditionsGeneral measures(carcinogens) G18CS15 General exposures(closed systems).Consider technical advances and process upgrades (includingautomation) for the elimination of releases. Minimise exposure usingmeasures such as closed systems, dedicated facilities and suitablegeneral / local exhaust ventilation. Drain down systems and clear transferlines prior to breaking containment. Clean / flush equipment, wherepossible, prior to maintenance.Where there is potential for exposure: Restrict access to authorisedpersons; provide specific activity training to operators to minimiseexposures; wear suitable gloves and coveralls to prevent skincontamination; wear respiratory protection when its use is identified forcertain contributing scenarios; clear up spills immediately and dispose ofwastes safely. Ensure safe systems of work or equivalent arrangementsare in place to manage risks. Regularly inspect, test and maintain allcontrol measures. Consider the need for risk based health surveillance.G20Handle substance within a closed system E47. Wear chemically resistantgloves (tested to EN374) in combination with ‘basic’ employee training2010-08-10 CSR 120