Installing InduSoft Web Studio - FF-Automation

Installing InduSoft Web StudioIWS Users Guidethe hardkey to the computer and then connect the printer cable to the hardkey.However, you may encounter problems if you install more than one hardkey (fordifferent products) on the same parallel port. On the other hand, while using theUSB hardkey, the USB port cannot be shared with any other device. Caution:Be careful when installing or removing a hardkey from the computer’sparallel port. We strongly recommend that you turn off the computer anddisconnect it from the power supply before installing or removing a hardkey.Softkey: When you install IWS or CEView, the program generates a unique codecalled a Site Code. You can send this site code to your software vendor, who willthen generate a license code called a Site Key to match your site code. The sitekey installs the IWS or CEView license on your computer or WinCE device. Note:When you use a softkey, IWS records the license in the computer’s (orWinCE device’s) non-volatile memory. If this device is damaged, you will losethe license.License SettingsBoth hardkey and softkey licenses set the following parameters:Product Type: Specifies which features and restrictions are enabled for theapplication (such as maximum number of tags supported, maximum number ofdrivers running simultaneously, and so on). Consult your software vendor aboutwhich product types are available and which features are enabled for each type.Execution Mode: Specifies the following options– Engineering Only: Configures and runs the application for testing duringdevelopment only. You cannot use this license as a long-term, runtimelicense.– Runtime Only: Runs the application for unlimited time. You cannot use thislicense to develop or modify the application.– Engineering + Runtime: Configures, modifies, and runs the application for anunlimited time.Number of Web Thin Clients: Specifies how many Web Thin Clients are supportedsimultaneously by the server. You can connect one or more Web Thin Clients tothe server simultaneously (for an additional charge), but the license installed onthe server must support these additional Web Thin Clients.Options for adding Web Thin Clients are as follows:– Server for InduSoft Web Studio (WinNT/2000/XP): Connects 0 (No Web ThinClients), 1, 2, 4, 8, 16, 32, 64, 128, or 256 Web Thin Clients to the serversimultaneously.– Server for CEView (WinCE): Connects 0 (No Web Thin Clients), 1, 2, 4, or 8 WebThin Clients to the server simultaneously.Version Supported: When you generate a license, the license will specify the productversion it supports.InduSoft Web Studio v6.1 SP2 2–13