12.07.2015 Views

TI110B1 GSM/PSTN Dual Network Burglar Alarm System

TI110B1 GSM/PSTN Dual Network Burglar Alarm System

TI110B1 GSM/PSTN Dual Network Burglar Alarm System

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Telephone failsto dial thenumbersEither the telephone or the local line isputin the wrong positionPut the local line andtelephone line into the rightpositionsThe numbers you store are wrong or are Re-store the right numbersnot stored successfullyThere is something wrong with Eliminate the fault of the localtelecommunication linelineBattery runs outChange a new batteryDetector is not activated or the alarm is Activate the detector and armPIR detector not armedthe alarm paneldoesn’t work or is The detector is in the “USE” mode, and Change the working mode intoslow in detecting there is a interval of 1 minute before “Test” mode to have a testthe targetrestart detectingThe code has not been matched Rematch the code of detectorsuccessfullyRepeat false alarmafter months of The battery runs shortChange a new batteryworkingThe “Under-voltage” indicator shines and Change a new batterythe battery runs out<strong>Alarm</strong> failure when The distance between the magnetic panel Make sure the distancethe indicator of and the transmitter is too farbetween the transmitter andmagnetic contactmagnetic panel is within 1cmstill shinesThe code has not matched successfully Rematch the code of magneticcontactThe remote control Some key get lock (the indicator shines) Reset the lock keydoesn’t work The battery runs out Change a new batteryNo alarm soundwhen alarmingImmediate alarm onarmingThe alarm paneldoesn’t sound voiceindicator whenautomatic codewithdetector/remotecontrolThe alarm panel is set into “Mute”The short-circuit wires of “Zone 2” and“Zone 10”get loose or fall offThe zone has matched code with 3detector or the alarm panel has matchedwith 15 different remote controlsThe code of detector is the same as that ofone matched code of another detectorSet the alarm volume into“High-volume”Make sure the short-circuitwires fixed wellIf necessary, please clear allmatched codes of this zoneClear the matched code orchange the 8-address code ofdetector for different codewww.best-china-security-supplies.com18

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!