Suspension Unit Assembly Ã¢Â€Â“ Front Ã¢Â€Â“ Remove And ... - Ford Scorpio

More documents

Recommendations

Info

Front Suspension14. Remove the spindle carrier to suspensionunit pinch bolt and nut.DTS140103213–03915. Remove the spindle carrier from thesuspension unit.TIS140105014–042–01WARNING: During this operation the springis under extreme load, therefore care mustbe taken at all times.16. Compress the spring.14–042TIS140103417. Slacken the lock nut.Use a 6 mm hexagon key to stop the pistonrod from rotating.MPS140103504/97 Scorpio ’95 14-01-4
Front Suspension781234518. Disassemble the suspension unit.1 Remove the lock nut.2 Remove the retainer.3 Remove the top mount.4 Remove the thrust bearing.5 Remove the upper spring seat.6 Remove the suspension unit.7 Remove the gaiter.8 Remove the bump stop.6TIS140103621359 Nm87654InstallCAUTION: Ensure that the spring endsbutt correctly against the upper and lowerseat stops.19. Assemble the suspension unit.1 Refit the bump stop.2 Refit the gaiter.3 Refit the suspension unit.4 Refit the upper spring seat.5 Refit the thrust bearing.6 Refit the top mount.7 Refit the retainer.8 Refit the lock nut.20. Decompress the spring.TIS140103704/97 Scorpio ’95 14-01-5
Page 6 and 7: Front Suspension21. Refit the spind
Page 8: Front Suspension31. Refit the front

Suspension Unit Assembly Ã¢Â€Â“ Front Ã¢Â€Â“ Remove And ... - Ford Scorpio

Create successful ePaper yourself

Delete template?

Save as template?