Vacuum Pump – Remove and Install (12 414 0 ... - Ford Scorpio
Vacuum Pump – Remove and Install (12 414 0 ... - Ford Scorpio
Vacuum Pump – Remove and Install (12 414 0 ... - Ford Scorpio
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
St<strong>and</strong>ard Braking System<strong>Vacuum</strong> <strong>Pump</strong> – <strong>Remove</strong> <strong>and</strong> <strong>Install</strong> (<strong>12</strong> <strong>414</strong> 0)<strong>Remove</strong>CAUTION: If brake fluid is spilled on thepaintwork, the affected area must beimmediately washed down with cold water.1. Disconnect the battery earth lead.AV M000000<strong>12</strong>. Disconnect the vacuum hose from thevacuum pump.MPJ<strong>12</strong>01047NOTE: Blank off the pipes to prevent any dirtingress.3. Disconnect the oil feed <strong>and</strong> return pipesfrom the vacuum pump.Allow the fluid to drain into a suitablecontainer.DTJ<strong>12</strong>0104407/94 <strong>Scorpio</strong> ’95 <strong>12</strong>-01-1
St<strong>and</strong>ard Braking System4. <strong>Remove</strong> the vacuum pump.MPJ<strong>12</strong>010425. <strong>Remove</strong> the pump to alternator ‘O’ ring.MPJ<strong>12</strong>01043<strong>Install</strong>6. Refit the pump to alternator ‘O’ ring.6 Nm7. Refit the vacuum pump.8. Reconnect the oil feed <strong>and</strong> return pipesto the vacuum pump.9. Reconnect the vacuum hose to thevacuum pump.10. Reconnect the battery earth lead.MPJ<strong>12</strong>0111507/94 <strong>Scorpio</strong> ’95 <strong>12</strong>-01-2
Change language