Suspension Unit Assembly – Front – Remove And ... - Ford Scorpio
Suspension Unit Assembly – Front – Remove And ... - Ford Scorpio
Suspension Unit Assembly – Front – Remove And ... - Ford Scorpio
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Front</strong> <strong>Suspension</strong>14. <strong>Remove</strong> the spindle carrier to suspensionunit pinch bolt and nut.DTS140103213–03915. <strong>Remove</strong> the spindle carrier from thesuspension unit.TIS140105014–042–01WARNING: During this operation the springis under extreme load, therefore care mustbe taken at all times.16. Compress the spring.14–042TIS140103417. Slacken the lock nut.Use a 6 mm hexagon key to stop the pistonrod from rotating.MPS140103504/97 <strong>Scorpio</strong> ’95 14-01-4
<strong>Front</strong> <strong>Suspension</strong>781234518. Disassemble the suspension unit.1 <strong>Remove</strong> the lock nut.2 <strong>Remove</strong> the retainer.3 <strong>Remove</strong> the top mount.4 <strong>Remove</strong> the thrust bearing.5 <strong>Remove</strong> the upper spring seat.6 <strong>Remove</strong> the suspension unit.7 <strong>Remove</strong> the gaiter.8 <strong>Remove</strong> the bump stop.6TIS140103621359 Nm87654InstallCAUTION: Ensure that the spring endsbutt correctly against the upper and lowerseat stops.19. Assemble the suspension unit.1 Refit the bump stop.2 Refit the gaiter.3 Refit the suspension unit.4 Refit the upper spring seat.5 Refit the thrust bearing.6 Refit the top mount.7 Refit the retainer.8 Refit the lock nut.20. Decompress the spring.TIS140103704/97 <strong>Scorpio</strong> ’95 14-01-5
<strong>Front</strong> <strong>Suspension</strong>21. Refit the spindle carrier to thesuspension unit.85 NmDTS140103822. Refit the link assembly to the suspensionunit.48 NmTIS140103946 Nm23. Refit the suspension unit and spindlecarrier as one assembly.TIS140104024. Refit the lower arm to the spindle carrier.80 NmTIS140102004/97 <strong>Scorpio</strong> ’95 14-01-6
<strong>Front</strong> <strong>Suspension</strong>25. Refit the link assembly to the stabiliserbar.80 NmMPS140102228 Nm26. Refit the track rod end ball joint to thespindle carrier.Fit a new split pin.MPS130100310 Nm27. Refit the ABS sensor.28. Reconnect the ABS sensor lead to thesuspension unit.29. Refit the brake disc and secure with anew spring clip.TAS120200230. Refit the brake caliper assembly.56 NmDTS120101404/97 <strong>Scorpio</strong> ’95 14-01-7
<strong>Front</strong> <strong>Suspension</strong>31. Refit the front wheel and lower thevehicle.32. Check the front wheel alignment asdescribed in Operation Nos. 14 111 0 and14 111 3.DTS120101285 Nm04/97 <strong>Scorpio</strong> ’95 14-01-8
Change language