Lever Assembly – Handbrake – Remove and Install ... - Ford Scorpio

Standard Braking SystemLever Assembly – Handbrake – Remove and Install (12 664 0)Remove1. Disconnect the battery earth lead.AV M00000012. Release the handbrake lever and raisethe vehicle.TIS120100413. De-adjust the handbrake cable.1 Remove the locking pin.2 Slacken the adjuster locknut.3 Slacken the adjuster until the levers on thecalipers have returned to their stops.3 2TIS120102607/94 Scorpio ’95 12-01-1

Standard Braking System210. Remove the handbrake lever assembly.1 Disconnect the handbrake warning lightmultiplug.2 Remove the handbrake lever assembly.TIS1201062131 NmTIS120106312Install11. Refit the handbrake assembly.1 Refit the handbrake lever assembly.2 Reconnect the handbrake warning lightmultiplug.12. Refit the handbrake gaiter and retainingplate.Ensure that the lower moulding andretaining plate engage correctly.13. Refit the centre console as described inOperation No. 43 814 0.14. Raise the vehicle.15. Reconnect the handbrake cable to theequaliser yoke.16. Refit the exhaust heatshield.40 Nm17. Reconnect the exhaust to muffler flangejoint.Refit the relevant rubber exhaust hangers.18. Adjust the handbrake as described inOperation No. 12 662 0.19. Lower the vehicle and reconnect thebattery earth lead.TIS120106407/94 Scorpio ’95 12-01-3