A4LDE renew - Ford Scorpio
A4LDE renew - Ford Scorpio
A4LDE renew - Ford Scorpio
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>A4LDE</strong> Automatic TransmissionAutomatic Transmission – Renew (17 214 5)Special Tools17-068Adjustment gauge,TR sensorWorkshop EquipmentAssembly table andstrapGV216617068Remove2341. Remove the automatic transmissionexternal components.1 Unclip the rod from the actuating lever andselector lever.2 Remove the bracket and actuating lever.1PZS1702031563 Disconnect the transmission control unitmultiplug.4 Detach the TR sensor multiplug.5 Remove the selector lever.6 Detach the TR sensor.Unclip the automatic transmission wiringloom.12. Remove the automatic transmissionexternal components (cont).NOTE: Ground lead.1 Vehicle speed (VSS) sensor.2 Vibration damper2PZS170203009/97 <strong>Scorpio</strong> ’95 00-01-1
<strong>A4LDE</strong> Automatic TransmissionNOTE: Escaping oil.3. Remove the torque converter.J1701101InstallNOTE: The hub of the torque converter mustengage fully with the drive gear of the oil pump.4. Fit the torque converter.J1701601A5. Check the installation depth of the torqueconverter.Installation depth ”A” between the converterassembly flange and the torque converterbore is 9 mm.J1701202224 Nm24 Nm16. Fit the automatic transmission externalcomponents.1 Fit the vibration damper.NOTE: Ground lead.2 Fit the VSS.IAS170253009/97 <strong>Scorpio</strong> ’95 00-01-2
<strong>A4LDE</strong> Automatic Transmission3IAS1702536127. Fit the automatic transmission externalcomponents (cont).NOTE: The guide of the TR sensor mustengage with the groove of the selector shaft.1 Fit the TR sensor and tighten the bolts fingertight.2 Fit the selector lever and turn the selectorshaft anti-clockwise until it reaches the stop.3 Turn the selector shaft clockwise threedegrees (to zero).Remove the selector lever.17–068111 Nm28. Fit the TR sensor and adjust it.NOTE: The position of the grooves in theselector shaft does not affect this adjustment.1 Fit the special tool and turn the TR sensoruntil the special tool rests in the grooves ofthe TR sensor.2 Tighten the TR sensor bolts.IAS170253509/97 <strong>Scorpio</strong> ’95 00-01-3
<strong>A4LDE</strong> Automatic Transmission131 Nm49. Fit the automatic transmission externalcomponents (cont).1 Fit the bracket and the actuating lever.2 Fit the selector lever.3 Clip the rod onto the actuating lever and theselector lever.4 Connect the TR sensor plug.3PZS1702531548 Nm25 Connect the multiplug to the transmissioncontrol unit. Fit the safety clip. Attach the automatic transmission wiringloom.09/97 <strong>Scorpio</strong> ’95 00-01-4
Change language