JJC RM-E2
JJC RM-E2
JJC RM-E2
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
2. After sliding the latch in the direction shown to unlatch the battery holder, remove the<br />
holder.<br />
3. Remove the battery from the battery holder.<br />
4. Insert a fresh battery with the face marked "+" on top.<br />
5. Slide the battery holder into the remote until the latch clicks into place.<br />
� Specification<br />
� 100% compatible with Nikon MLL3 infrared remote controls..<br />
� Easytoreplace CR2025 lithium battery.<br />
� Operating temperature: 5 °C to 40 °C (40 °F to 105 °F).<br />
� Typical Battery Life: up to 3 years, 20,000 exposures.<br />
�<br />
1 When the remote control is not in used for an extend period of time, please remove<br />
the battery from the remote control.<br />
2 Do not leave the remote control in any places exposed to excessive heat, humidity<br />
3 Do not leave remote control on or near a television, refrigerator, or other appliance<br />
with a magnetic field.<br />
4 If the remote control gets wet, wipe it with a dry towel as soon as possible.<br />
5 Do not use organic solvents, such as alcohol or paint thinner when cleaning the<br />
remote control.<br />
Compatible with NIKON Cameras<br />
Digital SLR<br />
D3000<br />
D70<br />
D5000<br />
D60<br />
D90<br />
D50<br />
D80<br />
D40<br />
D70s<br />
D40x<br />
Film SLR F65 F75 N65 N75<br />
Coolpix 9000 8800 8400 P6000<br />
LiteTouch 150ED 140ED 130ED 110S 100W<br />
Nuvis Nuvis S<br />
Copyright of <strong>JJC</strong> Technology Company<br />
2
Change language