ds chemport impulse ra-sf fountain solution - FUJIFILM Australia

More documents

Recommendations

Info

DS CHEMPORT IMPULSE RA-SF FOUNTAIN SOLUTIONChemwatch Independent Material Safety Data SheetIssue Date: 12-Oct-2011 CHEMWATCH 28-44319317SP(cs)Version No:2.0CD 2011/3 Page 2 of 7Section 2 - HAZARDS IDENTIFICATION• If swallowed, IMMEDIATELY contact Doctor orPoisons Information Centre. (show this containeror label).Section 3 - COMPOSITION / INFORMATION ON INGREDIENTSNAME CAS RN %propylene glycol monobutyl ether - alpha isomer 5131-66-8 10-302- ethyl hexanol 104-76-7
DS CHEMPORT IMPULSE RA-SF FOUNTAIN SOLUTIONChemwatch Independent Material Safety Data SheetIssue Date: 12-Oct-2011 CHEMWATCH 28-44319317SP(cs)Version No:2.0CD 2011/3 Page 3 of 7Section 5 - FIRE FIGHTING MEASURESFIRE INCOMPATIBILITY■ - Avoid contamination with oxidising agents i.e. nitrates, oxidising acids, chlorine bleaches, pool chlorine etc. as ignitionmay result.HAZCHEMNoneSection 6 - ACCIDENTAL RELEASE MEASURESMINOR SPILLS■ - Remove all ignition sources.- Clean up all spills immediately.- Avoid breathing vapours and contact with skin and eyes.- Control personal contact by using protective equipment.MAJOR SPILLS■ Moderate hazard.- Clear area of personnel and move upwind.- Alert Fire Brigade and tell them location and nature of hazard.- Wear breathing apparatus plus protective gloves.- Prevent, by any means available, spillage from entering drains or water course.Personal Protective Equipment advice is contained in Section 8 of the MSDS.Section 7 - HANDLING AND STORAGEPROCEDURE FOR HANDLING■ - DO NOT allow clothing wet with material to stay in contact with skin.The tendency of many ethers to form explosive peroxides is well documented. Ethers lacking non-methyl hydrogen atoms adjacent tothe ether link are thought to be relatively safe- DO NOT concentrate by evaporation, or evaporate extracts to dryness, as residues may contain explosive peroxides withDETONATION potential.- Any static discharge is also a source of hazard.- Before any distillation process remove trace peroxides by shaking with excess 5% aqueous ferrous sulfate solution or bypercolation through a column of activated alumina.- Distillation results in uninhibited ether distillate with considerably increased hazard because of risk of peroxide formationon storage.The substance accumulates peroxides which may become hazardous only if it evaporates or is distilled or otherwise treated toconcentrate the peroxides. The substance may concentrate around the container opening for example.Purchases of peroxidisable chemicals should be restricted to ensure that the chemical is used completely before it can becomeperoxidised.- A responsible person should maintain an inventory of peroxidisable chemicals or annotate the general chemical inventory toindicate which chemicals are subject to peroxidation. An expiration date should be determined. The chemical should either betreated to remove peroxides or disposed of before this date.- Avoid all personal contact, including inhalation.- Wear protective clothing when risk of exposure occurs.- Use in a well-ventilated area.- Prevent concentration in hollows and sumps.SUITABLE CONTAINER■ - Metal can or drum- Packaging as recommended by manufacturer.- Check all containers are clearly labelled and free from leaks.STORAGE INCOMPATIBILITY■ - Glycol ethers may form peroxides under certain conditions; the potential for peroxide formation is enhanced when thesesubstances are used in processes such as distillation where they are concentrated or even evaporated to near-dryness or dryness;storage under a nitrogen atmosphere is recommended to minimise the possible formation of highly reactive peroxides- Nitrogen blanketing is recommended if transported in containers at temperatures within 15 deg C of the flash-point and at orabove the flash-point - large containers may first need to be purged and inerted with nitrogen prior to loading- In the presence of strong bases or the salts of strong bases, at elevated temperatures, the potential exists for runawayreactions.- Contact with aluminium should be avoided; release of hydrogen gas may result- glycol ethers will corrode scratched aluminiumsurfaces.- Avoid reaction with oxidising agents.continued...
Page 1: DS CHEMPORT IMPULSE RA-SF FOUNTAIN
Page 5 and 6: DS CHEMPORT IMPULSE RA-SF FOUNTAIN
Page 7: DS CHEMPORT IMPULSE RA-SF FOUNTAIN

ds chemport impulse ra-sf fountain solution - FUJIFILM Australia

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?