Installation instructions - Turner Motorsport

More documents

Recommendations

Info

www.akrapovic.com3. Untighten the marked nuts of the clamps and slide them off the pipe joints (Figure 5).Figure 512
4. Pull the vacuum hoses off the vacuum actuators on both sides of the vehicle (Figure 6).Figure 613
Page 3: Installation instructionsAkrapovič
Page 6 and 7: www.akrapovic.comSymbolsThe followi
Page 8 and 9: www.akrapovic.comREMOVAL OF STOCK E
Page 10 and 11: www.akrapovic.comFigure 310
Page 14 and 15: www.akrapovic.com5. Unhook rubber b
Page 16 and 17: www.akrapovic.com7. Remove the snap
Page 18 and 19: www.akrapovic.comFigure 1118
Page 20 and 21: www.akrapovic.comWARNING: direct an
Page 22 and 23: www.akrapovic.com3. Attach the Akra
Page 25 and 26: 6. Attach the mufflers onto the sto
Page 27: 8. Link the rubber vacuum hoses to
Page 31 and 32: 11. Assemble the clamps and sferica
Page 33 and 34: 13. Tighten Tail Pipe clamps to a s
Page 35 and 36: 2. Disconnect the three marked conn
Page 37 and 38: 4. Pull the ECU unit out of the soc
Page 39 and 40: 6. Remove the marked terminal (blac
Page 41 and 42: 8. Link the transmitters grey wire
Page 43 and 44: 10. Reinstall the ECU, fuse box and
Page 45 and 46: WARNING: tighten the ground wire to
Page 48 and 49: www.akrapovic.com13. Dashboard or a
Page 50 and 51: www.akrapovic.comKEYFOB OPERATION:1
Page 52 and 53: www.akrapovic.comFinal installation
Page 54: www.akrapovic.com54

Installation instructions - Turner Motorsport

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?