Installation instructions - Turner Motorsport

More documents

Recommendations

Info

www.akrapovic.com7. Center the mufflers in respect to the rear bumper, tighten the double clamps and stock mufflerlinkage (using stock bolts and nuts) to a specified torques (Figure 19).WARNING: use anti-seize copper paste on linkage bolt threads!22Nm16ftlb30Nm23ftlbFigure 1926
8. Link the rubber vacuum hoses to the vacuum actuators on both mufflers (Figure 20).Figure 2027
Page 3: Installation instructionsAkrapovič
Page 6 and 7: www.akrapovic.comSymbolsThe followi
Page 8 and 9: www.akrapovic.comREMOVAL OF STOCK E
Page 10 and 11: www.akrapovic.comFigure 310
Page 12 and 13: www.akrapovic.com3. Untighten the m
Page 14 and 15: www.akrapovic.com5. Unhook rubber b
Page 16 and 17: www.akrapovic.com7. Remove the snap
Page 18 and 19: www.akrapovic.comFigure 1118
Page 20 and 21: www.akrapovic.comWARNING: direct an
Page 22 and 23: www.akrapovic.com3. Attach the Akra
Page 25: 6. Attach the mufflers onto the sto
Page 31 and 32: 11. Assemble the clamps and sferica
Page 33 and 34: 13. Tighten Tail Pipe clamps to a s
Page 35 and 36: 2. Disconnect the three marked conn
Page 37 and 38: 4. Pull the ECU unit out of the soc
Page 39 and 40: 6. Remove the marked terminal (blac
Page 41 and 42: 8. Link the transmitters grey wire
Page 43 and 44: 10. Reinstall the ECU, fuse box and
Page 45 and 46: WARNING: tighten the ground wire to
Page 48 and 49: www.akrapovic.com13. Dashboard or a
Page 50 and 51: www.akrapovic.comKEYFOB OPERATION:1
Page 52 and 53: www.akrapovic.comFinal installation
Page 54: www.akrapovic.com54

Installation instructions - Turner Motorsport

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?