Aerolite Winter Wrap_AW.indd - Trakker Products

Aerolite Winter WrapInstructionswww.trakkerproducts.co.uk

Please read these carefullybefore assemblingErect the Aerolite bivvyin the normal way.1_ Unroll the Winter Wrap and plugtogether the pole sections, ensuringthat all the spigots are fully inserted.Cover the Aerolite bivvy with theWinter Wrap and insert the pole endsinto the spare eyelets on the baseplates of the Aerolite.2_ Starting at the rear of the wrappeg out the rear two pegging pointsplacing your pegs approximately 3inches away from the Aerolite bivvy,and, with the wrap door zipped down,peg out the front.3_ Once this is completed you thenneed to peg out all of the remainingpegging points of the wrap.4_ In extreme conditions, or wherethe ground is soft or loose, peg outthe wrap separately, so as not toover-stress the existing pegs.AftercareIn order to stop mildew from formingand damaging your winter wrap it isvery important to dry them out assoon as possible after use.If you do not have the space to fullyopen at home then remove theouter bag and open it as much aspossible, turning it every few hoursuntil fully dry.Treat the fabric when necessary(every one or two years) with fabsilgold, this will replenish the fabric’swater repellent properties andextend the winter wraps life.Please noteFailure to dry your winter wrapcompletely and store as instructedmay invalidate any guarantee onthis product.Trakker Products LtdUnit C5BParkway Ind EstateNunnery DriveSheffieldS2 1TATel: +44 (0) 114 2589755Fax: +44 (0) 114 2582593Email: info@trakkerproducts.co.ukwww.trakkerproducts.co.uk