GRAIN BIN - Westeel

“J”, “K”, “L” AND 24” MAKE-UP 232779If more than one set of “J”, “K” and “L” boxed uprights are used (check wall sheet and upright layout), a 24” laminatemake-up section #232779 is inserted below the bottom “L” laminate. This allows easier access to connect anddisconnect the bin jack lifting lug to the uprights when boxed uprights are used. See base assembly diagram onprevious page for details on how the 24” make-up section is installed. When using the 24” make-up section#232779, note that the “L” laminate is offset 28” higher than the corresponding uprights instead of the normal 4”offset.Note: When using the 24” make-up section, some bolt holes on the “GY”, “JK” and “L” uprights do not line up.These holes do not need to field drilled. Where the “L” laminate overlaps the “GY” combination the top of the“L” laminate does not need to be bolted, as shown below.GYDOES NOTNEED TO BEBOLTED TO “GY”JKL20.0”J K L 232779JKLPage 25