GRAIN BIN - Westeel

More documents

Recommendations

Info

PLANNING THE LOCATION OF LADDER COMPONENTS (cont.)IF PRESENT, INSIDE LADDERSSHOULD BE CENTERED ON THEINSPECTION HATCHCENTER THE SIDEWALL LADDER ON THE ROOFLADDER, OR ROOF STAIRS, AS MUCH AS POSSIBLE.ON STIFFENED <strong>BIN</strong>S, THE POSITION OF THESIDEWALL LADDER RELATIVE TO THE UPRIGHTSCAN BE IMPORTANT (SEE BELOW). IT MAY BENECESSARY TO POSITION THE ROOF RELATIVE TOTHE UPRIGHTS WHEN INITIALLY ASSEMBLING TOAVOID INTERFERENCE WITH THE UPRIGHT.Rest PlatformLadder Cage(compatible with "passthrough rail" version)HIGHER MODELSSUPPORT ARM – P/N 234504 (6)PLASTIC CAP – P/N 234559SUPPORT ARM CLIPS– P/N 234517 (10)VERTICAL SUPPORT TUBE– P/N 234069PASS THROUGH RAILS – P/N 234505LOWER ARM– P/N 2341003/8” x 2½” BOLTS– P/N 150517INSPECTION HATCH CAGEAABLOCK-OFF PLATE(P/N 234530)LOWER MODELSPage 32
ROOF STAIR ASSEMBLYWall Ladder Assembly Considerations – When mated with a roof stairs, the wall ladders, cagesand eaves rails should be assembled as per the assembly instructions contained with those products.Z-Section SupportInspection HatchCage Assy.Roof Stair ModuleOutside LadderFor larger bin diameters, additional roof stair modules bolt together as shown in the assembly instructions.MATING HANDRAILSOVERLAP ATSUPPORT POSTLOCATIONS.ON LARGER COMMERCIALROOFS, THE HIGHER 7 ¼” Z –SECTIONS ARE USED BELOW THESTEP IN THE ROOF.Page 33
Page 1 and 2: Part Number: 194940Revision: 1Date:
Page 3 and 4: LIMITED WARRANTYWesteel Division of
Page 5 and 6: DISCLAIMERSFoundation DesignThe fou
Page 7 and 8: 9. Vertical tolerances between upri
Page 9 and 10: IMPORTANT NOTES1. In order to maint
Page 11 and 12: COMMERCIAL GRAIN BIN SPECIFICATIONS
Page 13 and 14: ANCHOR BOLT RADIUS(Externally Stiff
Page 15 and 16: UPRIGHT LOADS - COMMERCIAL GRAIN BI
Page 17 and 18: UPRIGHT LOADS - COMMERCIAL GRAIN BI
Page 19 and 20: ROOF SYSTEM Cont.Rafter to Stiffene
Page 21 and 22: WALL SHEET AND BOTTOM ANGLE ASSEMBL
Page 23 and 24: COMMERCIAL BIN UPRIGHT ASSEMBLYIntr
Page 25 and 26: “J”, “K”, “L” AND 24”
Page 27 and 28: Boxed Uprights: Special boxed uprig
Page 29 and 30: interference with the splice. When
Page 31: PLANNING THE LOCATION OF LADDER COM
Page 35 and 36: AERATION ORIENTATIONON COMMERCIAL B
Page 37 and 38: SIDEDRAW BAFFLE LOCATION DETAILSIMP

GRAIN BIN - Westeel

Create successful ePaper yourself

Delete template?

Save as template?