GRAIN BIN - Westeel

Boxed Uprights: Special boxed uprights are located at the bottom of certain tall bins. They consist of a heavy 10”wide upright segment (J), a heavy 10” wide laminate section (K), and another 5.5” wide laminate section (L) that isused to form a box. The 10” wide segments (JK) can be pre-assembled as previously indicated. The remaining5.5” wide section (L) cannot be installed until after the JK pre-assembly has been bolted to the bin, the base platehas been positioned, and all of the center bolts tightened. The 5.5” wide section (L) can then be bolted to JK alongthe mating flange holes. L rests against the base plate. To prevent water from damming in the boxed section, installthe cap plate (232738) as shown.OUTER FLANGE HOLESCAN BE USED FORCL JPREASSEMBLY3/8” x 1½” BOLT3/8” NUTK“K” LAMINATEL“J” UPRIGHTCAP PLATE(232738)BOXED UPRIGHTBASE PLATE“L” UPRIGHT“L” LAMINATE“J” UPRIGHT“K” LAMINATEMAKE-UPLAMINATE2327793/8” x 1” BOLT‘X’ LAMINATE‘G’ UPRIGHTBASE PLATE – 2327273/8” NUTSHIM – 232730BOXED BASEPLATE3/8” NUT3/8” x 1” BOLTBASE PLATE ASSEMBLY8.5” x 14” – #900147SEISMIC BASEPLATEANCHOR BOLTHEAVY WASHERSHIM 8.5” x 14”– #900149Page 27