Nimble OS SNMP Reference Guide - Spiceworks Community

26 | SNMP TrapsAlert/EventSeverityDescription/Possible CauseNotes/Actions12331warningThe specified fan stopped working.Verify that the fan is seated correctlyand is receiving power, and repair orreplace the fan as necessary.12332warningThe specified fan is missing.Verify that the fan is correctly seated,and if necessary, restore or replace thefan.Power supplyAlert/EventSeverityDescription/Possible CauseNotes/Actions123331233412335warningwarninginformationThe specified power supply is either notconnected or has failed.The specified power supply is missing.The specified power supply is workingcorrectly.Check the power supply and replace ifnecessary.Determine if the power supply has beenremoved or failed and replace or reseatif necessary.RAID managementAlert/EventSeverityDescription/Possible CauseNotes/Actions1240012401124021240312404124051240612407warninginformationinformationwarningwarningwarninginformationcriticalThe RAID array is degraded by thenumber of disks shown.The RAID array has started rebuildingthe specified disk.The RAID array has successfullycompleted rebuilding the specified disk.The system failed to rebuild the RAIDarray because not enough disks areavailable.The system failed to rebuild the RAIDarray on the specified disk due to I/Oerrors.The specified disk is missing from theRAID array.The specified disk has been marked asa spare.There were not enough spare disksavailable to assemble RAID on thearray.Replace any failed disks.Determine if the disk has failed or hasbeen removed and take correctiveaction.Fix any conditions that could be causingdisks to fail or not been seen. If theproblem persists, contact Support.