BERCO - MACHINE TOOL DIVISION - Assurich.com.my

technicaldataBADCworking capacity AC 650 AC 650Mboring capacitymm31–155 1.22”-6.10”31–155 1.22”-6.10”max. boring depthmm350 13.78”350 13.78”max. milling widthmm298 11.73”max. milling areamm200x750 7.87”x29.53”geometric featuresmax. spindle head travel (D)distance spindle C/L tocolumn waysuseful table surfacemax. table traversemmmmmmmm530 20.87” 530 20.87”335 13.20” 335 13.20”400x1000 15.75”x39.37” 400x1000 15.75”x39.37”830 32.68” 830 32.68”max. table cross traversemm70 2.76” 70 2.76”Fig. 5Fig. 5 - Boring a machine tool componentwith a dead-end hole tool.speedsspindle rotation speeds (6)spindle head workfeed speed (3), per revolutionspindle head fast feed, up anddown, per minute (1)table workfeed speeds (2), per minutemotor ratingr.p.m.mmmmmm105 210 280390 550 780105 210 280390 550 7800.06 0.12 0.18 0.06 0.12 0.18(.0024” .0047” .0071”) (.0024” .0047” .0071”)1200 47.24” 1200 47.24”52 104 2.05” 4.10”spindle head work feed andspindle rotationfast spindle head traverse,up and downtable traversetool grinderdimensions and weightskWkWkWkW1.2/0.9 (1.6/1.2 HP) 1.2/0.9 (1.6/1.2 HP)0.060 (0.080 HP) 0.060 (0.080 HP)0.072 (0.094 HP)0.190 (0.250 HP) 0.190 (0.250 HP)length (A)mm2570 101”2570 101”width (B)mm1175 46.25”1175 46.25”heigth (C)mm1920 75.59”1920 75.59”approx. weight, unpackedkg1240 2731 lb1250 2753 lbMeasurements, weights and executions are notbinding on the manufacturers.Motor rating is referred to 50 Hz frequency.approx. weight, ocean packedkg1540 3392 lb1550 3414 lb