Part 02 - Volkspage

More documents

Recommendations

Info

6-speed versionGearbox designModifications made for6-speed version237_001In principle, the 6-speed gearbox has the samearchitecture as the 5-speed gearbox.The gearbox housing cover had to be extendedto accomodate the 6th gear, which also involvedextending the input and output shafts.The synchromesh body for the 5th gear wasdesigned so that it can also be used to engage6th gear.26
Modifications to the 5-speed versionThe components for the 6th gear are arranged inthe gearbox housing cover.The gearbox housing coverSleeveNeedle bearingAlso covers the input and output shaft bearings.Compared to the 5-speed version manufacturedfrom sheet steel, a magnesium casting was used.The input and output shaftsRollerbearingChange gear,6th gearWere extended to accomodate the gear wheelsand change gears for the 6th gear.The change gear for the 6th gear runs in needlebearings on a sleeve of the input shaft. Thesleeve is also used as a support bearing by theinput shaft in the gearbox housing cover.The gear wheel for the 6th gear is located on theoutput shaft by means of longitudinal toothingand is mounted, with a collar, in the rollerbearing of the gearbox housing cover.Gearbox housing cover237_0656th gear wheel, withlongitudinal toothingRoller bearing27
Page 1 and 2: A 4-gate selector mechanism, with r
Page 3 and 4: The selection movementThe selection
Page 5 and 6: The reverse gear lockA push lock se
Page 7 and 8: R 1 3 5Position of gear leverduring
Page 9: Reversing light switch F4The revers
Page 13 and 14: Notes29
Page 15 and 16: 5. The angle piece on the selector

Part 02 - Volkspage

Create successful ePaper yourself

Delete template?

Save as template?